Self-stirring dissolved oxygen sensor for BOD measurement
Self-stirring dissolved oxygen sensor StirrOx® G for the measurement of the biochemical oxygen demand (BOD) according to the dilution method
Permanent flow for accurate measured values thanks to built-in stirrer
Accurate measuring results thanks to minimal use of oxygen
Perfectly adapted to BOD measurement in Karlsruhe and Winkler bottles
Self-stirring dissolved oxygen sensor for BOD determination in Karlsruhe bottles and Winkler bottles with OxiCal®-ST calibration and storage vessel, 3 exchange membrane heads, cleaning solution, electrolyte and abrasive foil.
Biochemical oxygen demand (BOD) is an important measurement parameter for anyone discharging effluent or running a waste water treatment plant. It is a difficult test to run and there are very few resources online which help new users get to grips with the technique.
Camlab offer a range of different analysis options for BOD to suit all types of user. The options are outlined below; from traditional bottle and multi-meter based set ups to bespoke all in one systems. Camlab can offer both demonstrations and advice to new and existing users, which will allow them to get the best results from this difficult analysis.
Ideal for single BOD sample analysis along with the ability to measure other parameter analysis (pH, ISE etc.). Camlab supplies several options from market leaders.
Hach Multi-Meters and DO Probes
The IntelliCAL LBOD101 Luminescent Dissolved Oxygen Probe can be used with:
WTW Multi-Meters and DO Probes
Several combinations are available:
Lovibond Multi-Meters and DO Probes
SD 400 Optical Dissolved Oxygen meter series:
Ideal for single and multiple sample analysis.
Lovibond BD 600 Series
The BD 600 is a respirometric system for the determination of Biochemical Oxygen Demand (BOD). The BD600 is equipped with an automatic start feature, measurement does not start until the temperature in the samples is the same as that in the thermostatically controlled cabinet. The system comes with all you need for analysis of 1-6 samples.
WTW Oxitop System
The unique feature of this system is that the heads contain the sensor and a measuring unit for independent setting and recording allowing a more flexible system. Options include:
Both bespoke systems have an extensive selection of accessories which includes their own brown glass flasks, overflow measuring flasks, stirring unit and reagents such as nitrification inhibitor and potassium hydroxide solution 45%. A thermostatic cabinet is an additional consideration.