£1,264.34 excl. VAT
£1,517.21 inc. VAT
Biochemical oxygen demand (BOD) is an important measurement parameter for anyone discharging effluent or running a waste water treatment plant. It is a difficult test to run and there are very few resources online which help new users get to grips with the technique.
Camlab offer a range of different analysis options for BOD to suit all types of user. The options are outlined below; from traditional bottle and multi-meter based set ups to bespoke all in one systems. Camlab can offer both demonstrations and advice to new and existing users, which will allow them to get the best results from this difficult analysis.
Ideal for single BOD sample analysis along with the ability to measure other parameter analysis (pH, ISE etc.). Camlab supplies several options from market leaders.
Hach Multi-Meters and DO Probes
The IntelliCAL LBOD101 Luminescent Dissolved Oxygen Probe can be used with:
WTW Multi-Meters and DO Probes
Several combinations are available:
Lovibond Multi-Meters and DO Probes
SD 400 Optical Dissolved Oxygen meter series:
Ideal for single and multiple sample analysis.
Lovibond BD 600 Series
The BD 600 is a respirometric system for the determination of Biochemical Oxygen Demand (BOD). The BD600 is equipped with an automatic start feature, measurement does not start until the temperature in the samples is the same as that in the thermostatically controlled cabinet. The system comes with all you need for analysis of 1-6 samples.
WTW Oxitop System
The unique feature of this system is that the heads contain the sensor and a measuring unit for independent setting and recording allowing a more flexible system. Options include:
Both bespoke systems have an extensive selection of accessories which includes their own brown glass flasks, overflow measuring flasks, stirring unit and reagents such as nitrification inhibitor and potassium hydroxide solution 45%. A thermostatic cabinet is an additional consideration.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
This link will take you to an external site. Please provide as much detail as possible so that we can get back to you with the right information.
Products in this Range