Wet laboratory benches with sink and skirting / shelf

Laboratory Benches With Sink & Skirting Shelf - 900 or 750mm total depth

About the range:

KitLab, supplied by Camlab is a modular range of laboratory furniture. It is composed of high quality materials and its main benefit is that it is very easy to install and assemble. Its modular design allows for easy upgrade and expansions to reflect any changing needs of the lab. Kitlab is highly customisable with a choice of colours and many additional extras that can be purchased. If you require customisation to your pieces, please contact us for assistance. The Kitlab range comprises of benches, cabinets, cupboards, sinks and more, including any extra fittings required.

Kitlab benches are 900mm high as standard and constructed of laminate with water-resistant white melamine in areas, with any edges covered in plastic.

Benches with sink and skirting are available in choice of four worktop materials and in a number of widths up to 1800mm wide. Additionally, benches are available in a choice of two depths – 750mm (featuring a 600mm deep metal sub frame) or 900mm (featuring a 750mm deep metal sub frame). The width of the skirting shelf is 160mm including a 10mm overhang.

Each bench is supplied with:

• 1 x Sink (150x300x90mm) (taps not included)
• 1 x dry worktop in 600mm or 750mm depth (with the shelf, this makes the total depth either 750mm or 900mm)
• 1 x 160mm wide shelf (when assembled this has a 10mm overhang)
• 2 or 3 x shelf supports (dependent on width)
• Epoxy coated metal frame (red as standard but also available in white). For 750mm deep benches, the frame depth is 600mm. For 900mm deep benches, the frame depth is 750mm. Frames have two legs for benches up to 1500mm wide and three legs for those that are 1800mm wide.
• 1 x fascia strip (white as standard, choice of yellow or blue)
• 1 x fluid back panel
• 1 x assembly strip
• 1 predrilled skirting (750mm frame only)

Sink Material depends upon bench material:

• Enamelled glass: black PP
• Postformed laminate: black PP
• Stretched sandstone: white sandstone bowl
• TRESPA (Composite resin): black PP 

Worktop Materials
Benches are available in a choice of four worktop materials

• Moulded laminate
• Enamelled glass
• TRESPA
• Sandstone

For a detailed guide to the technical specification of each material type, please read the ‘Worktop Materials’ tab.

Customisation:

• Choice of colours (red frame and white fascia strip supplied as standard, contact us if you require non-standard colours)
• Sliding door kit to enclose the bottom of benches- 
• Taps (please note:table moiunted taps are not possible with enamalled glass worktops)
• Electrical sockets

Other benches available in the range:
The following bench pieces are also available. Each piece is available with and without a skirting shelf.

• Dry bench without sink
• Bench with sink and no skirting shelf
• Bench with cut out for placing under fume hood
• Sink unit
• Corner piece
• Weighing table