Laboratory Work Benches – 600mm deep

£674.34 excl. VAT
£809.21
incl. VAT

SKU -

1211912

Please select options for stock availability

Only %1 left

Laboratory Benches Range – 600mm deep with 600mm subframe

About the range:

KitLab, supplied by Camlab is a modular range of laboratory furniture. It is composed of high quality materials and its main benefit is that it is very easy to install and assemble. Its modular design allows for easy upgrade and expansions to reflect any changing needs of the lab. Kitlab is highly customisable with a choice of colours and many additional extras that can be purchased. If you require customisation to your pieces, please contact us for assistance. The Kitlab range comprises of benches, cabinets, cupboards, sinks and more, including any extra fittings required.

Kitlab benches are 900mm high as standard and constructed of laminate with water-resistant white melamine in areas, with any edges covered in plastic.
Benches are available in choice of four worktop materials, in a number of widths up to 1800mm wide with a depth of 600mm. You can view our selection of 750mm deep benches here. The metal sub frame depth is 600mm.

Each bench is supplied with:

1 x dry worktop in 600mm depth
Epoxy coated metal frame (red as standard but also available in white) with depth of 600mm. Frames have two legs for benches up to 1500mm wide and three legs for those that are 1800mm wide.
1 x fascia strip (white as standard, choice of yellow or blue)
1 x fluid back panel
1 x assembly strip

Worktop Materials
Benches are available in a choice of four worktop materials

Moulded laminate
Enamelled glass
TRESPA
Sandstone

For a detailed guide to the technical specification of each material type, please read the ‘Worktop Materials’ tab.

Customisation:

Choice of colours (red frame and white fascia strip supplied as standard, contact us if you require non-standard colours)
Sliding door kit to enclose the bottom of benches-
Taps
Electrical sockets

Other benches available in the range:
The following bench pieces are also available. Each piece is available with and without a skirting shelf.

Bench with 750mm work top
Bench with skirting (choice of 750mm or 900mm total depth)
Wet Bench with sink
Bench with cut out for placing under fume hood
Sink unit
Corner piece
Weighing table

Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type:

Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges.

Enamelled Glass – This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270°C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front.

TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180°C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used.

Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.