Laboratory Work Benches 750mm deep

Laboratory Benches Range – 750mm deep with choice of 600mm or 750mm subframe

About the range:

Kitlab benches are 900mm high as standard and constructed of laminate with water-resistant white melamine in areas, with any edges covered in plastic.

Benches are available in choice of four worktop materials, in a number of widths up to 1800mm wide with a depth of 750mm. (You can view our selection of 600mm deep benches here). The metal sub frame depth is available as either 600mm deep or 750mm deep.

With the 750mm frame there is the ability to add a skirting shelf at a later date, this is not possible with the 600mm frame. 

Each bench is supplied with:

• 1 x dry worktop in 750mm depth
• Epoxy coated metal frame (red as standard but also available in white) with depth of 600mm or 750mm. Frames have two legs for benches up to 1500mm wide and three legs for those that are 1800mm wide.
• 1 x fascia strip (white as standard, choice of yellow or blue)
• 1 x fluid back panel
• 1 x assembly strip
• 2 or 3 x wall leaves to support the benchtop for 750mm deep benches

Worktop Materials
Benches are available in a choice of four worktop materials

• Moulded laminate
• Enamelled glass
• TRESPA
• Sandstone

For a detailed guide to the technical specification of each material type, please read the ‘Worktop Materials’ tab.

Customisation:

• Choice of colours (red frame and white fascia strip supplied as standard, contact us if you require non-standard colours)
• Sliding door kit to enclose the bottom of benches- 
• Taps
• Electrical sockets

Other benches available in the range:
The following bench pieces are also available. Each piece is available with and without a skirting shelf.

• Bench with 600mm work top
• Bench with skirting (choice of 750mm or 900mm total depth)
• Wet Bench with sink
• Bench with cut out for placing under fume hood
• Sink unit
• Corner piece
• Weighing table