Hach SL1000 Portable Parallel Analyser (PPA) performs common water tests with chemkey reagents, full kit supplied with started set of Chemkeys. Kit contains: Hach SL1000 meter, carrying case, 1 instrument sample cup, 2 electrode sample cups, rechargeable battery, battery charger, hand strap, instrument manual, and USB cable plus 1 pH electrode, 1 conductivity electrode and 1 box each of Free Chlorine, Total Chlorine, Monochloramine, Nitrite and Free Ammonia Chemkeys.
The Hach SL1000 Portable Parallel Analyser (PPA) performs common water tests with less than half the manual steps, it allows for up to six parameters to be tested simultaneously. Using the Hach Chemkey technology, the reagents contain the same chemicals and process steps as the traditional Hach reagents however these are delivered in simple, self-contained package.
The Hach SL 1000 unit can perform up to perform up to four colourmetric and two probe based measurements in parallel, creating a time efficient measurement without the hassle of having to handle powder pillows or glass vials.
Simply add your water sample into the stand, push in your Chemkey reagents into the unit, and lower the SL 1000 into the stand. A sensor on the bottom of the unit will recognise it's been placed into your water sample and draw up a water sample to carry out the test. This will then produce a reading on the front display. As many as four Chemkey sticks can be added into the unit to test different parameters simultaneously.
This unit has been made to test clean water, please get in touch with one of our technical support team on 01954 233 120 if you want to find out whether it would suit your application.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.