£12,135.00 excl. VAT
£14,562.00 inc. VAT
ELECTRONIC PROGRAMMING
The Camlab CUB range of washing machines incorporates the latest in microprocessor technology.The machines can be programmed to carry out washing, rinsing and drying cycles to meet a wide range of specific or demanding requirements for the decontamination of laboratory glassware.
CUB EXTRA DRYING SYSTEM
A fan draws in filtered air and directs it into a heating system. Hot filtered air is delivered to the washing tank and channelled into the spigots of the jet rack. The air is directed onto the internal surfaces of the glassware and dries them. Drying takes place at up to 110ºC, ensuring efficient drying of internal surfaces and an extremely fast cycle.
EFFECTIVE WASHING HEIGHTS
When using basket trays:
When using jet racks:
DEMONSTRATION FACILITIES
Demonstration facilities are available at our Cambridge offices specifically for customer trials and evaluation. This enables potential users to view and to operate the CUB range.
The CUB EXTRA 4090 washer is supplied without any trays, spray arms or baskets to allow you to configure your washer to your requirements from the wide range of accessories available.
WIDE RANGE OF JET RACKS AND ACCESSORIES
The CUB, EASY and CUB EXTRA can all use the same baskets, minimising spending for core facilities and maximising efficiency (the drying baskets whilst fitting the CUB and EASY will only operate under standard drying conditions, but the jets can still be used to maximum effect). A truly versatile and long lasting range, these washers can be supported by full service back up by factory trained engineers (some restrictions apply and contracts are for UK based machines).
For a basic configuration we recommend using Basic Trolley CS-2 and Spray Trolley CS-1. These will hold a wide variety of supports and baskets. For direct injection washing see our comprehensive range of jet racks. For advice on configuration please call our sales office.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
After glassware has been washed, it should be dried carefully to avoid introducing any impurities. Drying with paper towels can introduce fibres or dust which could affect high accuracy work. There are 3 main methods for quickly and cleanly drying lab glassware, each with their own specific benefits and drawbacks. [caption id="attachment_5129" align="aligncenter" width="300"] Lots of glas...
We want the process of purchasing a Glassware Washer to be as simple as possible. Below we provide some extra information and links to our specific guides.
|
|
|
|
|
Why do I need a laboratory-grade glasswasher? Why you should consider a professional glasswasher. |
Choosing the right test right glasswasher How do I choose the right washer for my glassware? |
Looking after your glasswasher Caring for your glasswasher will ensure reproducibilty of cleaning and long service |
If you require any further assistance, or extra information you can request that here and one of our trained technical specialists will be in contact. Please provide as much detail as possible so that we can get back to you with the right information.
Products in this Range
