Photometric determination of the decolouration of the bismuth xylenol orange complex The complexing agents are determined relative to the bismuth complexing index IBiC. The following conversion factors hold true: 1 mg/l IBiC = 1.4 mg/l EDTA (M = 292 g/mol) = 1.0 mg/l NTA This method is a screening test which covers strong complexing agents. If the result is positive, metals present in the sample may be partially or completely withdrawn from the photometric determination. For the analysis of metals in this case a decomposition (e. g. with Crack set Cat. No. 918 08 or NanOx Metal Cat. No. 918 978) has to precede the photometricmeasurement.Data
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.