Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
NANOCOLOR® Equipment
Software Downloads
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Approved
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Precise
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
Versatile
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
Unique
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
NANOCOLOR Potassium 50 (REF 985045) has been improved. The change is introduced from LOT 45004, which is available from stock as of 20th July 2020.
The test is now produced with an integrated ammonium compensation. The modified recipe allows a simple determination of potassium in the presence of an ammonium interference up to a concentration of 200 mg/L NH4-N, which is unique in the market.
The use of the additional ammonium compensation reagent (REF 918045) is therefore no longer necessary. Additional information on this topic will be part of our upcoming water news mailing.
Please note, that the test procedure has changed.
An update of the photometers is not required.
Please find the new product information within the following link.
Note: Please save your special methods and measurement data prior to the update. More information can be found in the customer information
For old photometers (PF-11 etc.) asking for blank guidance is available here.