Included in the box: Meter with battery installed, protective/hydration cap, scoop, pocket clip, holster, lanyard, ORP electrode cleaning paper, quick start guide.
The Myron Ultrapen PT4 reports free available chlorine (FAC) 0 - 10 ppm, quickly and accurately by measuring ORP (the chemical characteristic of chlorine that directly reflects its effectivity) cross referenced with pH.
The PT4 requires pH4, pH7, and pH10 pH buffer solutions along with 80mV Quinhydrone, 260mV Quinhydrone, or 470mV MLC Light's ORP Standard Solutions for wet calibration. Sensor storage solution should also be used for proper storage. These can be found in the 'required accessories' section.
Myron Ultrapen PT4 - Free Chlorine and Temperature Pen
The PT4 is produced by Myron L and measures free chlorine using an innovative measurement cell.
Advanced features include highly stable microprocessor-based circuitry; automatic temperature compensation from 15ºC to 30ºC while in calibration mode; user-intuitive design; and waterproof housing.
A true one-handed instrument, the PT4 is easy to calibrate and easy to use.
To take a measurement, you simply push a button then dip the PT4 in solution. Results display in seconds. Results display in seconds.
The ultrapen PT4 is designed to be extremely accurate, fast and simple to use in diverse water quality applications.
Specifications
Measures Free chlorine
Range: 0 - 10.0 ppm
Accuracy: < 5.00 ppm ± 0.3 ppm
5.00 ppm ± 0.5 ppm
Time to Reading Stabilization: 10 - 45 seconds
Power Consumption: Active Mode 37 mA, Sleep Mode 2 µA
Temperature Compensation: Automatic In Calibration Mode From 15ºC to 30ºC
Physical Dimensions: 17.15 cm L x 1.59 cm D / 6.75 in. L x .625 in. D
Weight: 50.4 g / 1.78 oz. (without soaker cap and lanyard)
Case Material: Anodized Aircraft Aluminum with Protective Coating
Battery Type: N type, Alkaline, 1.5 V
Calibration Standard Solutions: pH4, pH7, pH10 and at least one of ORP80, ORP260, ORP470
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors
Please click the Request Consultation button below and we will get back to you as soon as we can.
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120
The Bluetooth enabled Ultrapen meters by Myron L Company for pocket sized, portable testing of pH and conductivity are a great way to take, store and send readings. The app to take readings from the pens has now been updated to be compatible with iOS 9 devices - just search the app store for "Ultrapen PTBTx" to download the latest version and get testing. [caption id="attachment_8745" ali...