Palintest Instachlor PR tablets are a range of rapid dissolving chlorine release tablets for use in small scale and professional applications in water chlorination, water treatment and water disinfection. The range is comprised of five different sizes of tablet specially selected to suit a wide variety of uses. The tablets are prepared from an effervescent formulation containing sodium dichloroisocyanurate (NaDCC)* - an organic chlorine donor.
Instachlor tablets dissolve rapidly when added to water and release chlorine into solution. Instachlor PR tablets provide a simple and effective means of preparing chlorine solutions of known strength for chlorination, disinfection, or sterilisation purposes. The tablets may be added direct to water containers, water tanks, wells or small reservoirs.
The choice of Instachlor PR tablet will depend on the quantity of water to be treated.
The tablets should be used in accordance with standard water chlorination practice depending on the water to be treated and the purpose of treatment. Where chlorination is to be carried out to disinfect the water, a free chlorine residual of 1 mg/l should be achieved in the treated water. Note that it will normally be necessary to add a higher dose to satisfy the chlorine demand of the water. Whenever possible the water should be drawn from a clean source.
A chlorine dose of 2.5 mg/l and a standing period of at least 15 minutes is recommended. If a clean source of water is not available, or if any contamination is suspected, a higher chlorine dose, say 5 mg/l, should be applied. In all cases it is recommended that you test the water using (for example) Palintest Chlorocol, DPD or ChloroSense tests to check that an adequate chlorine residual has been achieved in the treated water.
Instachlor tablets (Dichloroisocyanurate or Di-Chlor*) tablets are fully compliant with current European Regulations, namely BS EN 12931 standard for chemicals used in the treatment of water for human consumption, and also with the US NSF Standard 60 - Drinking Water Treatment Chemicals.
*Dichloroisocyanurate is an effective alternative to the use of sodium hypochlorite (NaOCl) for the routine treatment of contaminated drinking water.
Available in formulations to support instant disinfection or longer-term dosing, Palintest’s disinfection products are supplied in a convenient tablet format delivering a defined dosage for new and existing infrastructure sanitization.
Instachlor provides a practical solution for applications in chlorination, disinfection, and sterilization. Instachlor PR tablets are a range of rapid dissolving chlorine release tablets for professional applications in water treatment, disinfection, and emergency chlorination. The tablets are prepared from an effervescent formulation containing sodium dichloroisocyanurate - an organic chlorine donor and dissolve rapidly when added to water to release chlorine into solution.
Steadichlor provides practical solutions for applications in chlorination, disinfection, and sterilization. Steadichlor tablets offer a simple and effective means of water chlorination without the need for complex dosing equipment. The tablets dissolve in water to give a slow steady chlorine release. The dissolving time is approximately four hours in flowing water or 12-24 hours in static water. Steadichlor tablets are prepared from calcium hypochlorite. In use, the tablets do not contribute any substances not normally present in treated mains water.
Disinfection of water mains and tanks
The Steadichlor system is established as one of the simplest means of disinfecting new or repaired water mains and tanks. A feature of the Steadichlor system is the unique Palintest Chlorocol test, especially developed for the control of mains disinfection procedures.
Chlorination of water
Steadichlor tablets offer an ideal means of chlorinating water in tanks, wells or small reservoirs, and wastewater in tanks or effluent streams. The tablets should be used in accordance with standard chlorination practice depending on the water to be treated and the purpose of treatment. Where chlorination is to be carried out to disinfect the water, free chlorination residual of at least 1 mg/L should be achieved in the treated water. Note that it will normally be necessary to add a higher chlorine dose to satisfy the chlorine demand.