campaignOFFERS & DEALS
local_shippingNEXT DAY & WORLDWIDE DELIVERY
buildSERVICE DEPARTMENT
loyaltyBROWSE BRANDS
Menu Mobile Camlab
campaignOFFERS & DEALS
local_shippingNEXT DAY & WORLDWIDE DELIVERY
buildSERVICE DEPARTMENT
loyaltyBROWSE BRANDS
- Home
- Products
- Lab Equipment
- Dataloggers
- Dataloggers
- EBRO EBI 12 Temperature/Pressure Logger
EBRO EBI 12 Temperature/Pressure Logger
EBRO EBI 12 Temperature/Pressure Logger
From
-
£3,491.97 excl. VAT
-
£4,190.36 inc. VAT
See below for stock
The EBRO EBI 12 series of temperature/pressure data loggers are high-precision measuring and recording units. They are operated with a lithium battery, and programmed and read using a PC.
The EBI 12 series of data loggers are high-precision measuring and recording units for temperature, humidity and/or pressure. They are operated with a lithium battery, and programmed and read using a PC.
A suitable interface (available as an accessory) and corresponding analysis software on the PC (e.g. "Winlog.validation", available as an accessory) are required for
programming the data logger. The interface is connected to the PC via Universal Serial Bus (USB).
The EBI 12 series of data loggers are available in various versions for a range of applications.
Cable probe Ø 1.2 mm, Lengths of 600 mm and 1200 mm
Pressure sensor connection
- Channels 1, 2, 3 or 4
- Temperature, temperature/humidity or temperature/pressure
- Temperature sensor versions, flexible or rigid
- Ø 1.5, 3.0 or 6.0 mm Lengths from 10 to 500 mm
Radial or axial position - Pointed or blunt version
- Standard
- M10 internal thread for hose, flange, or glass adapters Luer lock
General technical specifications: valid for all EBI 12-TP data loggers
- Operating temperature: pressure logger 0 °C ... +150 °C (+32 °F ... +302 °F)
- Accuracy: temperature ±0.1 °C (0 °C ... +120 °C) ±0.05 °C (+120 °C ... +140 °C) ±0.1 °C (+140 °C … +150 °C)
- Accuracy: pressure ±10 mbar (50 mbar … 150 mbar) ±10 mbar (2,050 mbar … 2,250 mbar) ±10 mbar (3,000 mbar … 3,250 mbar) ±15 mbar (for the remaining measurement range) Resolution: temperature 0.01 °C
- Resolution: pressure 1 mbar
- Data memory Max. 100,000 measurements (total)
- Sensor: temperature Pt 1000, Class A
- Sensor: pressure Piezoresistive pressure sensor (temperature compensated)
- Sampling rate 250 ms ... 24 h
- Measurement mode
- Endless measurement
- Measure upon start time
- Start immediately until end of memory
- Start- / Stop measurement Storage temperature 0 °C ... +125 °C (+32 °F ... +257 °F)
- Maximum operating pressure Pressure logger: 7 bar (abs)
- Minimum operating pressure Logger with flexible cable probe: 20 mbar (abs)
- Time accuracy (24h) < 5 sec
- Battery Lithium cell, 3.6 V, user replaceable
- Dimensions (Ø x H) 48 mm x 32 mm*
- Weight Approximately 120 g *
- Housing material 316 L Stainless steel / PEEK
- Protection class IP 68
- Certificate Factory calibration certificate
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
Products in this Range
