Rapid, precise and energy-saving temperature changes in the range from -42 ºC to +190 ºC, along with fast humidity recovery times, make the TTC temperature test chamber and the CTC climatic test chamber with humidity unit a perfect duo for controlled material and function tests, as well as ageing tests.
Compact size (256 l)
State-of-the-art control technology based on the Perfect performance class
Electronically controlled active humidification and dehumidification from 10% to 98% rh
Specifically suited for tests in accordance with DIN EN 60068-2-1, 2-2, 2-3 and 2-30
High-tech insulation system for permanent insulation capacity and energy efficiency
Average temperature change speed in heating operation: 10 K/min
Average temperature change speed in cooling operation: 6 K/min
Chlorine-free, ozone-neutral refrigerant R 404 A
As a result of the perfect coordination of heating and cooling technology, the environmental test chambers CTC and TTC work energy efficiently and at a low noise level.
Extensive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the inner chamber and housing Wide range of options for programming and documentation using interfaces, Celsius documentation software, integrated log memory and chip cards and of course these climatic test chambers are safety-tested and bear the CE mark.
Setting accuracy temperature
up to 99.9 °C: 0.1 / from 100 °C: 0.5
without humidity: from -42°C up to +190°C
with humidity from +10°C up to +95°C
Temperature distribution (spatial)
+/- 0.5 up to 2K
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)
humidification by hot steam generator
active humidifying and de-humidifying adjustable from 10-98 % rh with digital display of relative humidity - resolution of display 0.5 %, setting accuracy 1 %
By hot steam generator. Humidity supply with water (only for demineralised water with a conductivity of 5 to 10 μS/cm and a pH value between 5 and 7) from 2 x 10 l tank on telescopic slide integrated in chamber, with automatic change-over.
Entry port right, 80 mm, with stopper
1 stainless steel grid(s), electropolished
Works calibration certificate
standard values +10 °C and +37 °C, 60 % rh at +30 °C
fully insulated stainless steel door with double-locking and 4-point adjustment, heated
We want the process of purchasing a test chamber to be as simple as possible. Below we provide some extra information and links to our specific guides.
What is a test chamber?
A test chamber is used to simulate environmental conditions and this can be used in many applications including stability testing in a range of industry types. But how exactly is it different to a humidity chamber or an incubator? Can these units be certified medical devices? Can they perform testing in accordance with any recognised standards? What water supply is needed for a humidity chamber? If you want to know this and more including answers to an array of our most asked questions click here.
Choosing the right test chamber
Choosing the right test chamber for your application can be a bit of a minefield, with such a large selection available from our supplied brands Memmert and MMM Medcentre. Here we list the differences between chamber ranges such as what exactly the different controller types are and how this impacts use and other points to consider when selecting the most suitable chamber.
Caring for your test chamber
Test chambers are a costly purchase so you will want to keep it in top shape. You should be wiping down the chamber inside and out and be careful with how you load it to ensure efficient operation. If you want to know what else you should do to maintain your chamber and actions to follow to keep it working at its best then you can check out this page.
If you require any further assistance, or extra information you can request that here and one of our trained technical specialists will be in contact. Please provide as much detail as possible so that we can get back to you with the right information.
This link will take you to an external site. Please provide as much detail as possible so that we can get back to you with the right information.
A consultation visit from one of highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
your product or service requirements,
Please click the Request Consultation button below and we will get back to you as soon as we can.