- Home
- Products
- Lab Equipment
- Pumps
- Laboratory Vacuum Pumps
- N 840.3 FT.18 ATEX LABOPORT® Chemically Resistant Diaphragm Pump - PTFE head 34L/min, 8 mbar
N 840.3 FT.18 ATEX LABOPORT® Chemically Resistant Diaphragm Pump - PTFE head 34L/min, 8 mbar
- £2,045.08 excl. VAT
- £2,454.10incl. VAT
Add to Wish List
Add to Compare
Print PageChemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. Especially suited for handling aggressive vapors, it features a PTFE head, PTFE-coated diaphragm and FFPM valves. Flow Rate (max.): 34 l/min
Benefits
- Clean, 100% oil-free operation
- Chemically-resistant PTFE/FFPM flowpath
- Ideal for extremely aggressive/corrosive gases and vapors
- Compact, quiet and reliable
- Maintenance-free
- ATEX compliant to (Ex) II 2/-G IIB+H2 T3 internal atmosphere only
These pumps are suitable for distillation, filtration, preparation for analysis, sublimation, extraction, evaporation or drying. They include carry handle, rubber feet, on/off switch and mains cable. The pump head and diaphragm are made from PTFE and the valves from FFPM.
Key features:
- For air, gases and vapours
- Corrosion and solvent resistant
- Ideal replacement for water jet pumps
- Maintenance free
- Structured diaphragm gives long life
- Compact and portable
- Range of flow rates to suit a variety of applications
All models are ATEX compliant according to ATEX II 2G IIB+H2 T3X internal atmosphere only.
The inner, wetted area is equipped to transfer potentially explosive atmospheres - in this way they are suitable for category 2G internal atmospheres only. They are designed for transferring gases, vapours or mists that create conditions within the pump head in which the occasional formation of an explosive atmosphere is likely.
Please note that the drive motors used are standard AC motors that are not ATEX rated and therefore the complete pump should not be installed in a potentially explosive atmosphere.
All of these models require connection tubing of 10 mm inner diameter.
| Flow Rate (max.) | 34 l/min |
| Ultimate Vacuum (max.) | 8 mbar (abs.) |
| Pressure (max.) | |
| Weight | 12.6 kg |
| Permissible Media Temperature | 5-40 °C |
| Permissible Ambient Temperature | 5-40 °C |
| Valve Material Options | FFPM |
| Diaphragm Material Options | PTFE coated |
| Pump Head Material Options | PTFE |
Choosing the right Vacuum Pump for your laboratory is a crucial decision.
Vacuum pumps are found in many laboratories having a wide range of uses such as filtration, freeze-drying, evaporation and concentration amongst other uses. They come in a variety of sizes and functionality which can prove daunting to decide which is right for you particular use or is it uses?
To assist with this Camlab have created the following resources:
- General Information on Choosing a Vacuum Pump for your Laboratory
- Brand Specific laboratory pump selection guides:
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
