FABcontrol is the control unit for the magnetic stirrer FABdrive with a speed range of 80-990rpm and stirring power (max) of 100W.
Variable SoftStart-function for reliable catching/centering and safe accelerating of the stirring bar at different volumes and viscosities. Digital display for speed- and SoftStart-setting (variable, 20-99 seconds) and live speed, QuickSet for quick setting of the start-and maximum speed, QuickStop-function against after-run and glass breakage.
Beep-function at falling below set speed, storage of last function status when turning off, firm stainless steel housing, easy to clean. Interfaces (0-10 volts, 4-20 mA, RS232, USB, Ethernet), other housings (e.g. for DINrail installation), customized software adaption and stirring bar monitoring on request.
Type | FABcontrol |
Speed range | 80 - 990rpm |
Stirring power (max) | 100W |
Acceleration | Variable, 20-99s |
Buzzer, tolerance | variable, 5-50 rpm |
Housing material | Stainless steel |
Permitted operation conditions | 0 up to +40°C (at 80% humidity) |
Electrical data | 100-240 V/50-60 Hz/4.2 A |
Dimensions | 200 x 175 x 51mm |
Protection category | IP20 |
Weight (gross) | 2.0kg |
For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
Request Consultation |
The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |