Edge Multiparameter Hybrid meter for pH, EC or DO - Conductivity kit

The Edge meter by Hanna Instruments allows use on the benchtop, as a handheld meter or in a wall mount, for maximum flexibility and can be used with 1 probe to measure either pH, conductivity or dissolved oxygen.

Offering advanced technology for measuring, the smart, slim-line design means Edge can be used as a handheld, wall mounted or bench top meter.

The cutting edge design, capacitive touch keypad and intuitive user interface are just some of the features that make the meter stand out.

Each parameter is measured by a unique digital electrode. Connected by a easy plug-in 3.5mm connector, the smart electrode enables Edge to automatically recognise and store the sensor type, ID and calibration information.

Programmed for basic and advanced modes, Edge offers simplified features for routine measurements, or detailed data display. It warns the user if the electrode is not clean, or if the buffers are contaminated during calibration, using the exclusive Hanna CAL-CHECK feature. What's more, Edge will also warn you if the pH bulb is cracked or if the junction of the electrode is compromised.

Technical Specifications;

• Capacitive touch keypad
• Large 140mm LCD display with clear full text readout
• Digital smart electrode enables Edge to automatically recognise and store sensor type, ID and calibration information
• Slim lightweight design for handheld, bench top or wall mounted use
• PC interface via micro USB
• Data download to USB stick via standard USB connection
• GLP data automatically transferred
• Weight: 250g
• Dimensions: 202mm x 140mm x 12.7mm

pH

• Range: -2.00 to 16.00 pH and -2.000 to 16.000 pH
• Resolution: 0.01 pH and 0.001 pH
• Accuracy: ± 0.01 pH and ± 0.002 pH
• Calibration: automatic, 5 in standard mode, 3 in basic mode
• Temperature Compensation: automatic, -20 to +120°C
• Electrode: HI 11310 double junction refillable pH electrode complete with temperature sensor (ATC)

Conductivity

• Range for Conductivity: 0.00µS/cm to 500mS/cm in 5 ranges
• Range for TDS: 0.00mg/L to 400g/L absolute TDS in 6 ranges
• Range for Salinity: 0.0 to 400% NaCl, 0.01 to 42.00 PSU or 0.0 to 80.0 g/L
• Electrode: HI 763100 Conductivity probe
• Accuracy for conductivity, TDS or salinity: ±1% of reading

Dissolved Oxygen

• Range: 0.00 to 45.00 ppm or 0.0 to 300% saturation
• Resolution: 0.01ppm or 0.1% saturation
• Accuracy: ±1.5% of reading
• Calibration: one or two points at 0% (with HI-7040 solution) and 100% (in air)
• Temperature Compensation: automatic 0 to 50°C, RH max 95%