Chill and heat samples from -10 to +100°C (without sample block) with precise control, even at ambient temperatures, on this heavy-duty, versatile unit.
Blocks to fit 1.5ml tubes up to 50ml tubes and even round-bottom flasks are available as accessories.
The IC30 model offers the same features as the IC20 unit but has a higher capacity. Please note the IC30 model must be used with the high capacity blocks, not the standard blocks.
The completely solid-state EchoTherm IC30 unit is a large, heavy-duty, digital, electronic chilling/heating dry bath which is versatile, reliable and easy to use.
Simple digital controls with a backlit two line alphanumeric digital display make reading and programming the unit easy.
The chilling/heating surface is a 5" (127mm) square aluminium plate that is very flat for optimal sample contact. When unloaded, the plate surface can reach below 0°C in under 2 minutes, or heat to 37°C in 3 minutes. This rate of heating and chilling will vary with plate load.
When working with one of the solid aluminium tube holding blocks, temperatures down to 4°C are reached in less than 1 hour. The blocks can be driven below 0°C when insulated.
Temperature gradients from the centre to the edge of any of the aluminium tube holding blocks are less than 0.5°C at any temperature.
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
This link will take you to an external site. Please provide as much detail as possible so that we can get back to you with the right information.