- Home
- Products
- Lab Equipment
- Ovens & Incubators
- Laboratory Ovens
- MMM Durocell Eco Line Laboratory Oven 222L
MMM Durocell Eco Line Laboratory Oven 222L
- £7,691.15 excl. VAT
- £9,229.38incl. VAT
Add to Wish List
Add to Compare
Print PageThe MMM Durocell Eco 222l oven has a highly-resistant EPOLON-coated stainless steel interior, making them suitable for use with aggressive substances such as acids and alkaline liquids. Working temperature range is 5°C above ambient temperature, up to 125°C.
Internal volume: 222 litres
Temperature range: from 5°C above the ambient temperature up to 125°C
Internal chamber: stainless steel DIN 1.4301 (AISI 304)
Covered with chemically-resistant layer
Clean premises version on request.
Features:
- Microprocessor control Fuzzy Logic
- 3 inch trans-reflective LCD COG display
- Electronic security device type 2
- Exhaust duct
- Real time feature
- 9 programs
- 3-conductors PT-100 control sensor
- Keyboard block of unauthorized access
- Galvanized sheet metal painted housing
- 2 EPOLON plated trays included
- Up to 2 segments, up to 99 cycles
- Integrated RS 232 for Warmcomm or print
- Integrated USB Device for Warmcomm
- Interior from EPOLON / stainless steel
- Click out inner walls
- Acoustic and visual alarm
- Natural fine air flow in the chamber, noiseless operation
- High-quality and safe drying, heating and tempering of laboratory materials in laboratories and industry; perfect anticorrosive protection of all chamber parts (protective Epolon plastic) enabling wirk with acids and dases, acid and alkaline hydrolysis etc.
- High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening
- Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
- Wide range of optional equipment and accessories
- Output for a printer or PC connection
- Validation possibility (IQ , OQ)
Technical data
Interior of stainless steel material No. 1.4301
- volume: 222 l
- depth : 520 mm
- width: 540 mm
- height: 760 mm
Trays
- standard equipment: 2 pcs
- storage area (w × d)520×485 mm
- racks 10 max. no
- distance between guide rails: 70 mm
Maximal weight of the load*)
- inside the oven: 70 kg/oven
- per tray: 30 kg/tray
Door
- 1 pcs
External dimensions (including door and handle)
- depth: 790 mm
- diameter of the air branch outer/inner : 52/49 mm
- width: 760 mm
- height (Feet included - N): 1095 (N) mm
Package dimensions (three layers carton)
- depth: 860 mm
- width: 860 mm
- depth: 1260 mm
Weight
- Packed 116 kg
- nett: 100 kg
Working temperature (beginning of the regulation)
- from 5 °C above ambient temp. to:125 °C
Temperature accuracy according to DIN 12 880 T2, at working temperature with closed air flap and door
- time variation cca (±)0,8 °C
- space deviation cca (±) % of the reached temperature2 %
Time required to reach 100 °C with closed air flap and voltage 230 V
- 50 min
Heat emission at 100 °C
- 630 W
Air exchange speed at 100 °C
- 5 per hour
Electricity – mains 50/60 Hz
- max. power input: 1,8 kW
- nominal voltage: 230 V
- current: 7,8 A
- input in stand by mode: 5 W
Note: All technical data are related to 22 °C of ambient temperature and ±10 % voltage swing rate ventilator 100 %, defrost off, lighting off.
Changes in the design and make reserved.
The values may differ depending on specific charge and media parameters.
Servicing Options Available
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
