- Home
- Products
- Lab Equipment
- Meters for Measurement
- Spectrophotometers
- Eppendorf BioSpectrometer® Kinetic
Eppendorf BioSpectrometer® Kinetic
-
£7,650.69 excl. VAT
-
£11,017.00 inc. VAT
Eppendorf BioSpectrometer® Kinetic
Eppendorf BioSpectrometer® Kinetic 230 V/50?-?60 Hz with GB plug
About the range
The Eppendorf BioSpectrometer kinetic is an expansion of the Eppendorf BioSpectrometer basic and offers pre-programmed and freely programmable timed and temperature controlled assays.
It features an integrated heated cuvette shaft. Its integrated peltier element guarantees high-precision for determining enzyme and substrate kinetics as well as other temperature-sensitive applications.
Guided software is included; minimal effort is required to set up new assays. Retrospective modification of the time window for regression analysis can be made directly on the device.
The BioSpectrometer kinetic replaces the traditional large cumbersome setup required for temperature controlled timed assays.
Features:
- All Eppendorf BioSpectrometer basic options
- Integrated temperature-controlled cuvette shaft (adjustment range +20°C to +42°C in 0.1°C increments)
- Integrated interval timer (minimum interval 5s, maximum measuring time range 59 min 59s)
- Preprogrammed and freely programmable kinetic methods
- Retrospective modification of the time window for regression analysis
- Data transfer via USB interface, Ethernet or via e-mail and direct printout of results
- Data output as *.PNG screenshots, Microsoft® Excel®, or secure PDF files to a standard USB flash drive or via email
Applications:
- All Eppendorf BioSpectrometer basic applications
- Additional kinetic applications, and enzyme activity testings at different temperatures e.g.:
- Hexokinase activity measurements (340nm, 37°C)
- Determination of ATP concentration (340nm, 37°C)
- Beta-galactosidase assays (420nm, 30°C)
| Eppendorf BioSpectrometer® kinetic | |
|---|---|
| Absorption measuring range | 0?A?–?3.0?A (260?nm) |
| BSA concentration range (UV 280 nm) µCuvette® G1.0 | 758 ng/µL – 45,450 ng/µL |
| BSA concentration range (UV 280 nm) UVette® 10 mm | 76 ng/µL – 4,545 ng/µL |
| BSA concentration range (UV 280 nm) UVette® 2 mm | 379 ng/µL – 22,725 ng/µL |
| BSA concentration range (for 1 to 10 mm path length, calculation factor for BSA = 1.515 µg/µL) | 76 ng/µL – 45,450 ng/µL |
| Cuvette shaft | 12.5?mm?×?12.5?mm, tempered 20 °C – 42 °C |
| Detector Type | CMOS photodiode array, 1024 pixel |
| Light source absorption | Xenon flash lamp |
| Measuring principle absorption | Single-beam absorption spectrophotometer with reference beam |
| Method memory | >100 method programs |
| Operator guidance language | Spanish, Italian, French, English, German, Japanese |
| Power consumption | Approx. 30?W during operating step Approx. 5?W with dimmed display and temperature control switched off |
| Random error absorption | ≤0.002 at A?=?0 ≤0.005 (0.5?%) at A?=?1 |
| Random error wavelength | ≤0.5 nm |
| Random temperature error | ±0.15 °C at 25 – 37 °C |
| Sample light path length | 8.5 mm |
| Scanning | yes |
| Smallest step size | 1 nm |
| Spectral bandwidth | ≤4 nm |
| Systematic error absorption | ±1 % (A = 1) |
| Systematic error wavelength | ±1 nm |
| Systematic temperature error | ±0.2 °C at 25 – 37 °C |
| Wavelength Selection Increment | 1 nm |
| Wavelength range | 200?nm?–?830?nm |
| Wavelength range absorption | Scan (nm): 200 – 830 at 1 nm increments |
| dsDNA concentration range (UV 260 nm) µCuvette® G1.0 | 25 ng/µL – 1,500 ng/µL |
| dsDNA concentration range (UV 260 nm) UVette® 10 mm | 2.5 ng/µL – 150 ng/µL |
| dsDNA concentration range (UV 260 nm) UVette® 2 mm | 12.5 ng/µL – 750 ng/µL |
| dsDNA concentration range (for 1 to 10 mm path length) | 2.5 ng/µL – 1,500 ng/µL |
| Interfaces | › USB master: for USB stick and thermal printer DPU-S445 › USB slave for connecting to a PC (All functions available without PC) › Serial interface RS-232: for thermal printer DPU-414 › Ethernet interface RJ45: For connecting to a network printer or emailing data outputs directly off instrument |
| Power supply | 230 V, 50?–?60 Hz |
| Dimensions (W?×?D?×?H) | 295?× 400?× 150?mm?/ 11.6?× 15.7?× 6?in |
| Weight w/o accessories | 5.5 kg |
| Interval between two measuring points | 00:05 – 10:00 min:sec |
| Measuring time range | 00:05 – 59:59 min:sec |
| Adjustable temperature range | 20 – 42 °C (smallest step size 0.1 °C) |
Servicing Options Available
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
Products in this Range
