### Ideal for general sampling from drums, canisters, tanks, max. suction lift 5 m (depending on medium). With the MiniSampler PE the sample liquid only comes into contact with the suction hose and the sample bottle. the possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed using an airtight cap and with tamper-evident safety ring seal.the single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small diameter (8 mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible. Also suitable for viscous oils Not for aggressive acids. Vapors could destroy pump. MiniSampler PE complete with accessories in transport case. Contents: Vacuum pump 10 PE bottles 100 ml 10 m PE suction hose 6 x 8 mm 1 hose cutter 1 hose weight made of stainless steel AISI 304 20 seal-it bottle seals Operation 1. Place hose and bottle in pump. 2. Insert hose end to desired sample depth. 3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle. 4. Take off the filled bottles, close and label them.

### Ideal wherever the highest degree of purity is required, max. suction lift 5 m (depending on medium). With the MiniSampler PTFE the sample liquid only comes into contact with the suction hose and the sample bottle. the possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed using an airtight cap and with tamper-evident safety ring seal.the single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small diameter (8 mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible. Also suitable for viscous oils Not for aggressive acids. Vapors could destroy pump. MiniSampler PTFE complete with accessories in transport case. Contents: Vacuum pump 1 PFA bottle 180 ml 5 m PTFE suction hose 6 x 8 mm 1 hose cutter 1 hose weight made of stainless steel AISI 304 20 seal-it bottle seals