WQ 310 Waterproof 1 channel meter - carrying case, 4 x AA batteries and SD card

Servicing Options Available

Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.

The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.

Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.

Request a quote for your servicing requirements today.

Quote Request

Get to grips with how to use HORIBA's WQ 300 Series of portable meters with the following videos:

Measurement Mode

Calibration

Other

STEP 1 - Select your meter with 1, 2 or 3 channels

Meter, Carrying Case, Batteries, SD Card and Manual (sensor head, sensor and solutions are not included)

• WQ310-K 3200832605 WQ 310 Waterproof 1 channel meter in carrying case, 4 x AA batteries, wireless SD card, manual, and quick guide
• WQ320-K 3200832606 WQ 320 Waterproof 2 channel meter in carrying case, 4 x AA batteries, wireless SD card, manual, and quick guide
• WQ330-K 3200832607 WQ 330 Waterproof 3 channel meter in carrying case, 4 x AA batteries, wireless SD card, manual, and quick guide

STEP 2 - Select your electrode head

Parameters to select for your WQ-310, WQ-320 or WQ-330 meter - Connection between meter and Sensor

• 300PH-2 3200812206 300PH-2 pH sensor Head with 2 meter cable
• 300PH-5 3200812207 300PH-5 pH sensor Head with 5 meter cable
• 300-O-2 3200812204 300-O-2 ORP sensor Head with 2 meter cable
• 300-O-5 3200923561 300-O-5 ORP sensor head with 5 meter cable
• 300-C-2 3200784468 300-C-2 EC/TDS/RES/SAL Head with 2 meter cable
• 300-C-5 3200812202 300-C-5 EC/TDS/RES/SAL Head with 5 meter cable
• 300-I-2 3200812203 300-I-2 ION sensor Head with 2 meter cable
• 300-I-5 3200923560 300-I-5 ION sensor Head with 5 meter cable

STEP 3 - Select your electrode cartridge 

Electrodes to select for your WQ-310, WQ-320 or WQ-330 - sensors can be connected if using 3200821465

• 300-P-C 3200786363 300-P-C pH sensor Cartridge
• 300-O-C 3200922104 300-O-C ORP sensor cartridge
• 300-4C-C 3200780928 300-4C-C 4-Cell EC sensor Cartridge, Epoxy, carbon body, 10 μS/cm to 2000 mS/cm
• 300-2C2C 3200820579 300-2C2C, 2-Cell EC sensor Cartridge, Stainless Steel, K=0.1, 0,01 to 500 µS/cm
• 300-2C-C 3200844642 300-2C-C, Flow cell for 300-2C2C conductivity sensor, glass
• 300-D-2 3200780940 300-D-2 Optical DO sensor, 2m cable, includes 1 membrane cap
• 300-D-5 3200780942 300-D-5 Optical DO sensor, 5m cable, includes 1 membrane cap

STEP 4 - Select your calibration solutions

60 ml Calibration solutions

• 560-PH 3200820791 pH 4.01, 7.00, 10.01 (60ml each)
• 560-C 3200820792 84uS/cm, 1413 uS/cm, 12.88 mS/cm, 111.8 mS/cm (60ml each)

Replacement for Dissolved Oxygen membrane and BNC connector adapter

• 300-D-M 3200781554 Replacement DO cap for 300-D-2 and 300-D-5
• 300 BNC 3200821465 Connector for BNC Electrode to Electrode Head
• 300-EXT-10 3200921588 Cable for WQ-300 series, 10 meter

Below is a detailed overview of these components with images