The TU5 Series employs a unique optical design that sees more of your sample than any other turbidimeter, delivering the best low level precision and sensitivity while minimising variability from test to test.
Matching lab and online results - for the first time you wil be able to remove the uncertainty of which measurement to trust, thanks to the patented, identical 360° x 90° Detection Technology in both instruments.
This unique optical design sees more of your sample than any other turbidimeter, delivering the best low level precision and sensitivity while minimizing variability from test to test.
Everything about turbidity, faster - the TU5 Series dramatically reduces the time needed to get a turbidity measurement you can rely on.
The TU5 series of benchtop turbidimeters are available in four different models all with a stable, laser light source. Choose from EPA or ISO models, with or without the RFID option which allows you to compare values from online and lab measurements.
Light source; Class 2 laser product with embedded 650nm (EPA models) or 850nm (ISO models) max 1.0 mW Class 2 laser source (complies with IEC/EN 60825-1 and to 21 CFR 1040.10 in accordance with Laser Notice No. 50)
Range of EPA models; 0-700 NTU, 0-100 mg/L, 0-175 EBC
Range of ISO models; 0-1000 NTU, 0-100mg/L, 0-250 EBC
Accuracy; ±2% of reading plus 0.01 NTU from 0 to 40 NTU or ±10% of reading from 40 to 1000 NTU
Resolution; 0.0001 NTU / FNU / TE/F / FTU / EBC / mg/L
Repeatability; <40 NTU: better than 1% of reading or ±0.002 NTU, >40 NTU: better than 3.5% of reading
Units; NTU, FNU, TE/F, FTU, EBC, mg/L (if calibrated with degrees calibration curve)
Warranty; 1 year
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.