The TL23 Series benchtop turbidimeters for a wide range of turbidity applications with trusted technology offering improved functionality and simplifying testing.
This range replaces Hach's 2100 and 2100N series of turbidimeters.
The features offered in the TL23 range include a colour touch screen, USB port for data transfer, self-diagnostics for quality assurance and single point calibration for measurements under 40 NTU/FTU.
The large, full colour touch screen display and intuitive user interface accelerate setup, calibration and measurements. An easy interface and guided procedures give you confidence in your results.
With a USB port for easy data export, sample identification for traceability and self-diagnostics for quality assurance.
Stable readings and accurate analysis are achieved by capturing turbidity readings only once the device detects sample stability. This quality step removes subjectivity and the need for repeated measurements.
Four different models are available; two with a tungsten lamp at 460nm (in accordance with EPA guidelines) and two with LED light source at 860nm (in accordance with ISO guidelines).
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
|
|
|
|
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
|
Request a quote for your servicing requirements today.
For an accurate measurement of turbidity a sample vial is placed in an nephelometer meter called a turbidimeter or turbidity meter. The meter emits a known intensity of light through the sample cell and the scattered light is measured at 90 degrees to the light source to give a turbidity reading in units NTU (nephelometric turbidity units) or FTU (formazin turbidity units). There are a range...
Add to Wish List
Add to Compare
Print Page
