TitroLine 7000 automatic titrator for greater control and capacity for high accuracy work.
Store up to 50 user methods
pH-stat application - a given pH is adjusted and then kept constant, applied to e.g. enzyme activity determination, elution of soil sample at pH 4, monitoring the pH value during chemical syntheses
Detect and calculate up to 2 equivalence points during one titration - used to separately determine the calcium and magnesium hardness rather than only total hardness.
Used in a range of industries from analytical laboratory work to food, water, wastewater or environmental testing.
Automatic Titrator for exchangeable heads for potentiometry
With its performance spectrum, the TitroLine 7000 is the ideal starting device for potentiometric titration with potential for expansion and automation. Thanks to the high-resolution and precise pH/ mV and “dead-stop” measuring interface, it is possible to determine a wide range of parameters quickly, reliable and accurate.
High visibility, full colour display that can be easily viewed from a distance and at extreme angles.
Reagent data is securely stored in the intelligent and interchangeable modules
Includes up to three USB, on Ethernet and two RS232 ports for expansion and connection of devices
Export the results as PDF or CSV, also to networks.
Specific features for the TitroLine 7000
Automatic wireless recognition of SI Analytics ID electrodes guarantee accurate calibration and measurements
High resolution pH/mV-electrode and temperature inputs for pH, ISE, redox (ORP) or photometric titrations.
Perfect for non-aqueous titration such as acid and base numbers in oils (TAN and TBN)
Polarizable electrode input for set endpoint titrations („Dead-stop“)
Linear (fixed increment) and dynamic equivalence point titration mode and titration to endpoints
pH Stat titrations
Single and continuous measuring function
Formula editor for individual calculations
Titrations with the new photometric sensor OptiLine 6
Dosing with up to two connected piston burettes per method
Titration with external piston burette
Measuring input analog
pH/mV-input with 24 bit transducer. Electrode socket according to DIN 19 262 or BNC with RFID receiver for SI Analytics ID electrodes
Measuring range pH/accuracy
- 3.0… 18.00 / 0.002 +/- 1 digit
Measuring range mV/accuracy
- 2000…2000/ 0.1 +/- 1 digit
Measuring input µA:
μA-connector for double platinum electrodes, connection: 2 x 4 mm - sockets), polarisation voltage variably adjustable
Measuring input temperature:
Connector for Pt 1000 / NTC 30 KOhm ( connection: 2 x 4 mm - sockets)
Measuring range temperature
Pt 1000 - 75…195 °C / NTC 30 KOhm - 40 …125 °C
3 × USB (2 x USB-A and 1 × USB-B), 2 × RS-232-C and 1 x LAN
5, 10, 20 ml or 50 ml intelligent interchangeable burette units
according to DIN ISO 8655, part 3: accuracy: < 0.15 % precision: < 0.05 - 0.07 % (in dependence of the used burette size)
3.5 inches - 1/4 VGA TFT graphic color display with 320 x 240 pixels
15.3 x 45 x 29.6 cm (W x H x D), height with interchangeable head
2.3 kg for basic device, 3.5 kg für complete device with interchangeable head (with empty reagent bottle)
Ambient temperature: + 10 ... + 40 °C for operation and storage Humidity according to EN 61 010, Part 1: max. relative humidity 80 % for temperatures up to 31 °C, linear decrease down to 50 % relative humidity at a temperature of 40 °C
100-240 V; 50/60 Hz, power input: 30 VA
EMC compatibility according to the Council Directive: 2004/108/EG; applied harmonized standards: EN 61326-1:2006 Low-voltage directive according to the Council Directive 2006/95/EG Testing basis EN 61 010, Part 1