TitroLine 7000 automatic titrator for greater control and capacity for high accuracy work.
Used in a range of industries from analytical laboratory work to food, water, wastewater or environmental testing.
Automatic Titrator for exchangeable heads for potentiometry including PC Titration software 3.3.
The titration software TitriSoft 3.3 is the optimum solution for your titration tasks. The software can be used with Windows 7, 8.1 and 10 and supports your daily work procedures during sample preparation, titration and evaluation of the results. The software has been developed to be clear, logical and user-friendly.
Connection possibilities
Using TitriSoft 3.3 you can control the following devices from a PC:
In combination with the new TitriSoft 3.3 / 3.3 P, a so-called "parallel" titration can be carried out with a TitroLine 7000 and a TITRONIC300 / 500 piston burette. This means you only need one titrator and one piston burette to carry out two titrations simultaneously, in parallel. An example would be a titration with a pH electrode and with the OptiLine 6 photometric sensor.
| Measuring input analog | pH/mV-input with 24 bit transducer. Electrode socket according to DIN 19 262 or BNC with RFID receiver for SI Analytics ID electrodes |
| Measuring range pH/accuracy | - 3.0… 18.00 / 0.002 +/- 1 digit |
| Measuring range mV/accuracy | - 2000…2000/ 0.1 +/- 1 digit |
| Measuring input µA: | μA-connector for double platinum electrodes, connection: 2 x 4 mm - sockets), polarization voltage variably adjustable |
| Measuring input temperature: | Connector for Pt 1000 / NTC 30 KOhm ( connection: 2 x 4 mm - sockets) |
| Measuring range temperature | Pt 1000 - 75…195 °C / NTC 30 KOhm - 40 …125 °C |
| Interfaces: | 3 × USB (2 x USB-A and 1 × USB-B), 2 × RS-232-C and 1 x LAN |
| Interchangeable burettes | 5, 10, 20 ml or 50 ml intelligent interchangeable burette units |
| Resolution (Steps): | 20.000 steps |
| Dosing accuracy: | according to DIN ISO 8655, part 3: accuracy: < 0.15 % precision: < 0.05 - 0.07 % (in dependence of the used burette size) |
| Display | 3.5 inches - 1/4 VGA TFT graphic color display with 320 x 240 pixels |
| Housing material | Polypropylene |
| Dimensions | 15.3 x 45 x 29.6 cm (W x H x D), height with interchangeable head |
| Front keyboard | Polyester coated |
| Material interchangeable burettes | Valve: PTFE/ETFE; Cylinder: borosilikate glass 3.3 (DURAN) hoses (FEP, blue) |
| Weight | 2.3 kg for basic device, 3.5 kg for complete device with interchangeable head (with empty reagent bottle) |
| Ambient conditions | Ambient temperature: + 10 ... + 40 °C for operation and storage Humidity according to EN 61 010, Part 1: max. relative humidity 80 % for temperatures up to 31 °C, linear decrease down to 50 % relative humidity at a temperature of 40 °C |
| Power supply: | 100-240 V; 50/60 Hz, power input: 30 VA |
| CE-sign: | EMC compatibility according to the Council Directive: 2004/108/EG; applied harmonized standards: EN 61326-1:2006 Low-voltage directive according to the Council Directive 2006/95/EG Testing basis EN 61 010, Part 1 |
The FOS/TAC ratio is a commonly used indicator for assessing the fermentation process within biogas reactors, where FOS is a measure of the volatile organic acids (measured in mg CH3COOH/l) and is TAC is a measure of the total inorganic carbon i.e. the alkaline buffer capacity of the system (measured in mg CaCO3/l). In simple terms, this ratio looks at acid vs alkaline in the system which helps...
Add to Wish List
Add to Compare
Print Page
