£4,370.26 excl. VAT
£5,244.31 inc. VAT
In the Stuart SMP50 Automatic Melting point the latest digital camera technology is employed to produce a high resolution video of the sample melt, this allows the intelligent melt algorithm to identify the smallest of changes within the sample, accurately and reliably determining the melting point of up to three samples simultaneously.
The SMP50 has a custom designed user interface based on an established Android platform for intuitive setup and navigation. The familiar elements of an Android operating system help the user to feel comfortable, with everything where you would logically expect it.
All operation is via the 7" high definition colour touchscreen. Once programmed, users can leave the SMP50 to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.
A generous 8GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC for a more permanent long term record. All video files include a temperature stamp, so whatever device you view them on you can confirm the automatically obtained result.
The SMP50 features a useful storage drawer to house all standard capillary tubes. The drawer also contains a small glass cutter that can be used to accurately cut sample tubes in half, for those users who prefer not to use whole tubes. Not only will the glass cutter always get the cut in the centre of the tube, but it will also reliably give a clean cut making sample loading cleaner and safer.
While all measurement files can be easily transferred onto a PC from the SMP50 there is also an accessory printer for direct printing of the results directly from the unit.
All units are factory supplied with a calibration certificate showing individual serial number for traceability. The SMP50 also conforms to Pharmacopeia and GLP. Optional version with IQ/OQ available
|Technical Specification||Stuart SMP50 autmated melting point|
|No of samples||3 simultaneously|
|Temperature range||Ambient to 400 °C|
|Temperature resolution||0.1 °C|
|Display||7 inch HD Colour|
|Ramp rates||0.1-20°C in 0.1°C increments|
|Temperature sensor||PT1000 Platinum resistance|
|Memory||8GB (approx. 300 results with video)|
|Cool down time 350-50°C||~12 mins|
|Heat up time 50-350°C||~ 6 mins|
|Oven control||Closed loop PID|
|Data transfer||USB Flash drive|
|Sample level||2-3mm in 50mm or 100mm length capillaries|
|Electrical supply||120V 230V, 50-60Hz|
|Temperature units||°C or °F|
|Size (h x d x w)||164 x 360 x 300mm|
BioCote anti-microbial coating additive is present on all Stuart brand equipment and offers anti-microbial action to help prevent cross-contamination.
This unique additive is applied during the manufacturing process and contains trace levels of active silver ions which provide an effective anti-microbial action, active against many strains of common bacteria and fungi, including Aspergillus niger, E.coli and Listeria mono.
This coating remains active for the entire product lifespan and can actually help in prolonging the life of products, where a build up of microbes may cause premature material degradation.
BioCote works by inhibiting bacteria in a number of ways including protein damage, cell membrane damage, oxidative damage and DNA interference. Ultimately, the bacteria are prevented from replicating. Without this, bacteria have been shown to die naturally within around 8 hours. BioCote works in a way different to antibiotics so it is currently effective against antibiotic resistant strains.
More recently, BioCote technology was proven effective against particular virus strains, with a reduction of 90% in 2 hours against feline coronavirus, strain Munich. Read more here.
|For more information on this product please click the Request information button below and we will get back to you as soon as we can.|
|Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120|
Products in this Range