- Home
- Products
- Lab Furniture
- Lab Benches & Cupboards
- Skirting Shelving and Compartments
- Cupboard with vertical drawers
Cupboard with vertical drawers
- £5,798.79 excl. VAT
- £6,958.55incl. VAT
Add to Wish List
Add to Compare
Print PageSupplied ready assembled.
- White, waterproof melamin coated dense chipboard (inside and outside)
- White frosted finish
- 2 vertical drawer units on telescopic supports (max load 100kg).
- 12 shelves with raised edges - (6 shelves per drawer)
- Wall fixing accessories are included - the top of this unit must be screwed to the wall (1 attachment point)
- Supplied ready assembled
- Each shelf is 640mm long x 205mm wide x 40mm high
- About 200mm space between shelves (depending on positioning of the shelf)
- On each drawer, shelves 3 and 6 (half way down and at the bottom) are fixed position, the other 4 shelves are adjustable in position
NB It is important that the unit is fixed to the wall.
Dimensions: 600mm x 2000mm x 750mm (WxHxD)
Kitlab furniture is available with a choice of benchtop materials. This is a breakdown of the key features of each type:
Moulded Laminate - Suitable for labs in which non-corrosive materials are being used, such as microscopy rooms, physics and electronics laboratories and benches where instruments are stored. This benchtop has white-fronted rounded edges.
Enamelled Glass – This material is highly resistant to corrosive materials and temperature fluctuations. Its seam free and water tight design make it easy to clean and decontaminate, making this material particularly well suited to biology, bacteriology and life science labs. It has a high temperature resistance up to 270°C, is shock resistant and resistant to many corrosive chemicals (note: not resistant to HF acid). It is composed of 6mm thick opal coloured enamelled glass bonded to a waterproof chipboard layer with a white PVC edge on the front.
TRESPA - A solid grade material based on thermosetting resins- homogeneously reinforced with cellulose fibres. Scratch, wear and impact resistant. Colourfast. Temperature resistant to 180°C for 15 minutes without change. Resistant to dry heat (BS3794). TRESPA can be used in areas where laboratory chemicals, solvents, disinfectants, dye stuffs and bleaching agents are likely to be used.
Sandstone (Earthenware)- is especially suited to chemical lab due to its high level of resistance to acids (except HF acid) and alkalis. This benchtop is composed of a non-porous earthenware tile bonded to a 19mm thick water resistant backing complete with silicone sealing. It is edged with white PVC to the front.
