The spectrophotometer NANOCOLOR Advance combines the most important features of our portable compact photometer PF-12Plus and our high-precision spectrophotometer NANOCOLOR VIS II.
It provides precise and reliable measurement results in the daily laboratory routine and can also be used mobile due to its rechargeable battery. With its wavelength spectrum of 340 - 800 nm it allows the measurement of all photometrically evaluable test kits from MACHEREY-NAGEL. The NANOCOLOR Advance can therefore be used universally in the entire spectrum of water and wastewater analysis.
The spectrophotometer NANOCOLOR Advance combines the most important features of our portable compact photometers and our high-precision spectrophotometers. Experience outstanding user-friendliness combined with high-quality results. Operate this device like your smartphone or tablet and enjoy the intuitive and icon-based menu navigation.
The spectrophotometer NANOCOLOR Advance combines the most important features of our portable compact photometer PF-12Plus and our high-precision spectrophotometer NANOCOLOR VIS II. It provides precise and reliable measurement results in the daily laboratory routine and can also be used mobile due to its rechargeable battery. With its wavelength spectrum of 340 - 800 nm it allows the measurement of all photometrically evaluable test kits from MACHEREY-NAGEL. The NANOCOLOR Advance can therefore be used universally in the entire spectrum of water and wastewater analysis.
Brand | NANOCOLOR |
Type | Spectrophotometer with reference detector technology (RDT) |
Light source | Halogen lamp |
Optical system | Monochromator |
Wavelength | 340 nm–800 nm |
Wavelength accuracy | ± 2?nm |
Wavelength resolution | 1 nm |
Wavelength reproducibility | ± 0.1?nm |
Wavelength calibration | Automatic |
Wavelength selection | Automatic, barcode, manual |
Scan speed | 1 complete scan in less than 3?min |
Spectral bandwidth | < 4 nm |
Photometric range | +/- 3.0 E in the range 340–800?nm |
Photometric accuracy | 0.003 E at 0.0–0.5 E; 1% at 0.5–2.0 E |
Photometric linearity | <?0.5?% at 0.5–2.0 E; ≤?1% at >?2 E with neutral glass filters at 546?nm |
Stray light | <?0.5 % |
Measuring modes | More than 200 pre-programmed tests and special methods; 99 fully programmable methods; absorbance; transmission; factor; kinetics; 2-point calibration; scan; nephelometric turbidity measurement |
Preprogrammed tests | NANOCOLOR tube tests and standard tests, VISOCOLOR ECO test kits and Powder Pillows |
Turbidity measurement | Nephelometric turbidity measurement (based on ISO 7027, 16 mm and 24 mm) 1–1000 NTU |
Cuvette slot | Tube test 16?mm, 24?mm OD; Standard test 10?mm, 20?mm, 40?mm and 50?mm |
External light | Insensitive to external light, fast measurements without cuvette slot cover |
Data memory | 1000 results, GLP conform |
Display | Backlit colored 5" display with touch screen |
Internal quality control | With NANOCONTROL NANOCHECK 2.0 |
Operation | Barcode technology, icon-based menu guidance, touch screen |
Language | DE?/??EN?/??FR?/??ES?/??PT?/??PL?/??NL? |
Interfaces | LAN (CAT 6, only use shielded cables with a maximum length of 20 m) 2 x USB (Host), 1 x USB (Function) |
Update | Free via USB stick |
Operating range | 10–40?°C, max. 80?% relative humidity (non-condensing) |
Power supply | Input 110–240?V AC, Output 12?V 3A DC; 6,4 V, 7,2 Ah via built-in battery |
Dimensions | 325 x 280 x 130 mm |
Weight | 3.8 kg |
Warranty | 2 Years |
CE certified | Yes |
Scope of delivery | Photometer, manual (quick start guide), protective covering, power cable, USB stick, calibration cuvette, certificate and cleaning cloth |
Hazardous material | No |
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
NANOCOLOR® Equipment
Software Downloads
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Approved
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Precise
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
Versatile
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
Unique
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
NANOCOLOR Potassium 50Â (REF 985045) has been improved. The change is introduced from LOT 45004, which is available from stock as of 20th July 2020.
The test is now produced with an integrated ammonium compensation. The modified recipe allows a simple determination of potassium in the presence of an ammonium interference up to a concentration of 200 mg/L NH4-N, which is unique in the market.
The use of the additional ammonium compensation reagent (REF 918045) is therefore no longer necessary. Additional information on this topic will be part of our upcoming water news mailing.
Please note, that the test procedure has changed.
An update of the photometers is not required.
Please find the new product information within the following link.
Note: Please save your special methods and measurement data prior to the update. More information can be found in the customer information
For old photometers (PF-11 etc.) asking for blank guidance is available here.Â
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following: Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
|
Request a quote for your servicing requirements today.
Offering the unique combination of photometry, pH and turbidity measurement the pHotoFlex Turb by WTW consists of a compact and easy to use device for water analysis. This robust unit, ideal for the field, fits the spec of an everyday-use photometer but with the added option of using an infra-red light source for nephelometric turbidity measurements and adding a pH probe. We were ...
Spectrophotometers are relied on by a wide range of laboratories, for tests ranging from specific parameters, like chlorine or metals concentrations, right through to complex analyses of reaction kinetics. When choosing a spectrophotometer the range of specifications and price is vast, so take the time to list the features you need before you buy and make sure you choose the right one. [c...