OFFERS & DEALS 
NEXT DAY DELIVERY
SERVICE DEPT 
BROWSE BRANDS 
Account- Home
- Lab Equipment
- Liquid Handling
- Multichannel Pipettes
- Products
- Socorex Initial Pack - Acura Electro 956 12-ch Multichannel pipette
Socorex Initial Pack - Acura Electro 956 12-ch Multichannel pipette
-
£714.56 excl. VAT
-
£857.47 inc. VAT
The electronic pipette includes a microprocessor-controlled motor and rechargeable battery pack. Four models with 8 and 12 channel cover the volume range 0.5 to 350 µL. Additional interchangeable volumetric modules available as accessories.
- Large selection of 8- and 12-channel models
- Light weight and perfect hand fitting
- Sequential tip ejection
- Also fit any single channel volumetric module
Features:
- Natural ergonomics - The Acura®electro offers shape, balance and working ergonomics resembling those of a manual instrument.
- Pipetting cycle counter - A simple double click gives access to the number of pipetting cycles performed since last zeroing.
- Unique "left or right" display reading - Display converts instantly to right or left side reading. All information clearly presented and visible at a glance during programming, pipetting and calibration steps.
- Variable speed - Located on the front side, speed selector allows swift change even during the pipetting process. In addition, slow speed access at any time by gentle touch of start button.
- Interchangeable volumetric modules - One control unit fits a choice of 27 volumetric assemblies available separately. This greatly extends working possibilities and makes electronic pipetting affordable to all budgets. Disassembling and re-assembling without any tool contributes towards maximal flexibility. Calibration specificities of extra modules - as set by factory QC or by pipette owner - are retained in instrument memory.
- Long working autonomy - NiMH battery pack exchangeable instantly. Fast battery charging (< 1.5 hours) and extended working autonomy (> 3000 consecutive pipetting cycles). Battery charge level clearly visible on display. Automatic energy saving stand-by when unused.
- Adjustable tip ejection - Maximal efficiency obtained with a large surface, ergonomically located ejector button. The shaft height adjustment system called JustipTM (4 mm span) - controlled by efficient click-stops - allows a wide selection of tips to tightly fit the nozzle.
- Time efficient maintenance - Pipette construction limits maintenance to a minimum - no tool required to remove volumetric module. The pipetting cycle counter facilitates maintenance monitoring. Whenever sterilisation is needed, volumetric modules can be autoclaved at 121°C / 250°F.
- Calibration- Control software gives immediate access to calibration menu. Performance check possible over two or three independent volumes (Vmin, Vmid and Vmax). New settings entered directly from the keyboard. Error message warns of any inaccurate plunger movement.
Pipetting modes
Mode |
Action |
Suitable for |
| Forward | Aspiration and pipetting of set volume | All daily pipetting applications |
| Reverse | Aspiration in excess followed by dosing of set volume | Viscous, volatile and foaming liquids. Enhances reproducibility below 20 µL |
| Stepper | Tip filling and step-by-step distribution | Aliquot samples |
| Dilution | Aspiration of 2 or 3 different volumes for restitution in one shot | Dilution samples |
| Tactile | Monitoring of aspiration or distribution while touching activation button | Measurement of unknown volumes, gel loading or titration |
| Mixing | "Up and down" liquid flow in the tip / vial | Sample mixing in small tubes |
Performance information
Volume |
Inaccuracy (E%) |
Imprecision (CV%) |
|||||||||||
Range |
Division |
Channel |
Min. vol. |
Mid. vol. |
Max. vol. |
Min. vol. |
Mid. vol. |
Max. vol. |
|||||
| 0.5 - 10 µL | 0.05 µL | 8/12 | <± 3.5 % * |
<± 1.5 % | <± 1.0 % | < 3.0% * | < 0.9 % | < 0.7 % | |||||
| 2.5 - 50 µL | 0.25 µL | 8/12 | <± 1.0% * |
<± 0.9 % | <± 0.8 % | < 1.0 % * | < 0.6 % | < 0.4 % | |||||
| 10 - 200 µL | 1.0 µL | 8/12 | <± 0.9 % * | <± 0.7 % | <± 0.6 % | < 0.6 % * |
< 0.4 % | < 0.25 % | |||||
| 20 - 350 µL | 5.0 µL | 8/12 | <± 1.0 % * |
<± 0.8 % | <± 0.6 % | < 0.6 % * |
< 0.4 % | < 0.25 % | |||||
|
Performance values obtained with bidest water at constant temperature (± 0.5°C) comprised between 20 and 25°C, in accordance with ISO 8655. Results can be improved by individual calibration in each mode. |
|||||||||||||
|
For more information on this product please click the Request information button below and we will get back to you as soon as we can.
|
|
This link will take you to an external site. Please provide as much detail as possible so that we can get back to you with the right information.
|
Products in this Range
