Socorex Initial Pack - Acura Electro 926 XS Electronic Micro pipette 10-200µl

£888.87 excl. VAT
£1,066.64
incl. VAT

SKU - 1150374

926.0200E

SKU -

1150374

CALL FOR LATEST AVAILABILITY 01954 233110

Socorex Initial Pack - Acura Electro 926 XS Electronic Micropipette 10-200µl

The Acura Electro 926 range includes a microprocessor-controlled motor and rechargeable battery pack. It also contains an intuitive software avoiding any complicated programming steps. Eight models cover the volume range 0.1 to 1000 µL. Additional interchangeable volumetric modules available as accessories.

Reduced shaft length and conical end improve driveability
Easy access to microtubes and microplates
Optional longer volumetric modules
Simple conversion of volumes with interchangeable volumetric volumes
Unsurpassed metrological performance and stability

Features:

Natural ergonomics - The Acura^®electro offers shape, balance and working ergonomics resembling those of a manual instrument.
Pipetting cycle counter - A simple double click gives access to the number of pipetting cycles performed since last zeroing.
Unique "left or right" display reading - Display converts instantly to right or left side reading. All information clearly presented and visible at a glance during programming, pipetting and calibration steps.
Variable speed - Located on the front side, speed selector allows swift change even during the pipetting process. In addition, slow speed access at any time by gentle touch of start button.
Interchangeable volumetric modules - One control unit fits a choice of 27 volumetric assemblies available separately. This greatly extends working possibilities and makes electronic pipetting affordable to all budgets. Disassembling and re-assembling without any tool contributes towards maximal flexibility. Calibration specificities of extra modules - as set by factory QC or by pipette owner - are retained in instrument memory.
Long working autonomy - NiMH battery pack exchangeable instantly. Fast battery charging (< 1.5 hours) and extended working autonomy (> 3000 consecutive pipetting cycles). Battery charge level clearly visible on display. Automatic energy saving stand-by when unused.
Adjustable tip ejection - Maximal efficiency obtained with a large surface, ergonomically located ejector button. The shaft height adjustment system called Justip^TM (4 mm span) - controlled by efficient click-stops - allows a wide selection of tips to tightly fit the nozzle.
Time efficient maintenance - Pipette construction limits maintenance to a minimum - no tool required to remove volumetric module. The pipetting cycle counter facilitates maintenance monitoring. Whenever sterilisation is needed, volumetric modules can be autoclaved at 121°C / 250°F.
Calibration- Control software gives immediate access to calibration menu. Performance check possible over two or three independent volumes (Vmin, Vmid and Vmax). New settings entered directly from the keyboard. Error message warns of any inaccurate plunger movement.

Pipetting modes

Mode	Action	Suitable for
Forward	Aspiration and pipetting of set volume	All daily pipetting applications
Reverse	Aspiration in excess followed by dosing of set volume	Viscous, volatile and foaming liquids. Enhances reproducibility below 20 µL
Stepper	Tip filling and step-by-step distribution	Aliquot samples
Dilution	Aspiration of 2 or 3 different volumes for restitution in one shot	Dilution samples
Tactile	Monitoring of aspiration or distribution while touching activation button	Measurement of unknown volumes, gel loading or titration
Mixing	"Up and down" liquid flow in the tip / vial	Sample mixing in small tubes

Performance information

Volume		Inaccuracy (E%)			Imprecision (CV%)
Range	Division	Min. vol.	Mid. vol.	Max. vol.	Min. vol.	Mid. vol.	Max. vol.
0.1 - 2 µL	0.01 µL	<± 2.5 %¹⁾	<± 1.2 %	<± 0.9 %	< 2.5%¹⁾	< 1.5 %	< 0.8 %
0.5 - 10 µL	0.05 µL	<± 1.2%²⁾	<± 0.8 %	<± 0.6 %	< 1.5 %²⁾	< 0.7 %	< 0.35 %
0.5 - 10 µL	0.05 µL	<± 1.2%²⁾	<± 0.8 %	<± 0.6 %	< 1.7 %²⁾	< 0.8 %	< 0.4 %
1- 20 µL	0.1 µL	<± 1.2%²⁾	<± 0.6 %	<± 0.5 %	< 1.2 %²⁾	< 0.4 %	< 0.3 %
2.5 - 50 µL	0.25 µL	<± 1.0 %²⁾	<± 0.6 %	<± 0.5 %	< 0.7 %²⁾	< 0.3 %	< 0.25 %
5 - 100 µL	0.5 µL	<± 1.0 %²⁾	<± 0.6 %	<± 0.5 %	< 0.7 %²⁾	< 0.3 %	< 0.2 %
10 - 200 µL	1.0 µL	<± 1.0 %²⁾	<± 0.6 %	<± 0.4 %	< 0.6 %²⁾	< 0.2 %	< 0.15 %
50 - 1000 µL	5.0 µL	<± 0.8 %²⁾	<± 0.5 %	<± 0.4 %	< 0.4 %²⁾	< 0.15 %	< 0.1 %
Performance values obtained with bidest water at constant temperature (± 0.5°C) comprised between 20 and 25°C,in accordance with ISO 8655. Results can be improved by individual calibration in each mode. 1) measured at 0.5 µL 2) measured at 10% of nominal volume

For more information on this product please click the Request information button below and we will get back to you as soon as we can.

Request information

Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.

Your product or service requirements
Performance criteria
Budget constraints
Site access
Project timeframes
Services available
Environmental factors

Please click the Request Consultation button below and we will get back to you as soon as we can.

Request Consultation

The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120