Sink units With Metal Legs

Sink Units On Metal Legs

About the range:

KitLab, supplied by Camlab is a modular range of laboratory furniture. It is composed of high quality materials and its main benefit is that it is very easy to install and assemble. Its modular design allows for easy upgrade and expansions to reflect any changing needs of the lab. Kitlab is highly customisable with a choice of colours and many additional extras that can be purchased. If you require customisation to your pieces, please contact us for assistance. The Kitlab range comprises of benches, cabinets, cupboards, sinks and more, including any extra fittings required. Each piece of furniture is constructed from laminate and water repellant melamine. 

Kitlab benches are 900mm high as standard and these units are available in either 600mm or 750mm depth. 

Sink units are available in a number of widths up to 1500mm and a choice of sandstone (ceramic), polypropylene or stainless steel. Depending on the widths, units come with 1 or 2 sinks.

Each sink unit is supplied with:

• 1 x metal frame (either 600mm deep or 750mm deep)
• 1 x worktop (either 600mm or 750mm depth)
• Sink (sizes vary depending on material and unit width, see below for further details) (taps not included)
• 1 x melamine fluid back panel
• 1 x melamine assembly strip
• 1 x fascia strip (white as standard, choice of yellow or blue)

Materials Available & Sinks 
Sink units are available in a number of materials (sandstone (ceramic), polypropylene and stainless steel). The material and unit length determine the number and dimensions of sinks present. 

• The 600mm wide units come with 1 sink in the centre.
  • Sandstone: 360 x 370 x 210 mm 
  • Polypropylene: 380 x 380 x 210 mm
• The 900mm wide units come with 1 sink in the centre.
  • Sandstone:360 x 370 x 210 mm 
  • Polypropylene: 540 x 380 x 310 mm
• The 1200mm wide units have choice of 1 or 2 sinks in sandstone and 2 sinks in polypropylene
  • Sandstone (1 or 2 sinks): 360 x 370 x 210 mm (each)
  • Polypropylene (2 sinks): 380 x 380 x 210 mm (each)
• The 1500mm wide units come with 2 sinks
  • Sandstone: 360 x 370 x 210 mm (each)
  • Polypropylene: 380 x 380 x 210 mm (each)
  • Stainless Steel: 400 x 340 x 160 mm (each)

Customisation:

• Choice of colours (red frame and white fascia strip supplied as standard, contact us if you require non-standard colours)

Other benches available in the range:
The following bench pieces are also available. Each piece is available with and without a skirting shelf.

• Dry bench without sink
• Bench with sink and no skirting shelf
• Bench with cut out for placing under fume hood
• Sink unit with and without skirting shelf, with cupboard or metal frame.
• Corner piece
• Weighing table