Water purification system ideal for laboratory tasks including glassware rinsing, buffers and stains, reagent make-up and media preparation. ECO version helps reduce water and electricity waste by using reverse osmosis systems with high water recovery rates.
Output at 10 °C - 14.4l/hr
Output at 25 °C - 24l/hr
Compatible Cartridges: PT8 & PP8
No integral storage. An external tank is required.
The Select HP water purification units by Suez are able to deliver a steady supply of > 10MΩ.cm pure water for laboratory tasks using carbon pre-treatment, reverse osmosis, de-ionisation and micro-filtration. A raw water boost pump is included as standard for optimum performance. The ECO version reduces water and electricity waste by using reverse osmosis systems with high water recovery rates and intellegent standby mode.
A choice of products are available with up to 48ltrs/h (based on feed water pressure of 4 bar) output.
Water quality is monitored and displayed on the digital display. It can be dispensed directly (up to 2ltrs/min) from the unit as well as from its storage tanks.
The Suez range is formally known under the brand of Purite.
Features of the Select Range:
The select range of water purification systems offers a compact, robust and simple to use solution to your water purification needs. There are six models in the range: Analyst, edi 60, HP, Purewater 300, Fusion and the Neptune Ultimate.
Common features of the range include:
Semi-automatic cleaning cycles
Water qualities comply with the BS EN ISO3696 and ASTM-D1193-06 industry standards. All units are manufactured within the ISO9001:2008 guidelines.
Typical Applications of HP Models:
Typical applications for model in this range include HPLC, ion chromatography, atomic absorption, hydrogen generation, and clinical analyser feed.
This is achieved using 0.1um internal filtration, 0.2um point of use filter and UV light (when combined with the UV external tanks). This unit will display a number of water quality parameters. It is also compatible with the remote dispense pod.
Treated Water Specification:
Inorganics > 10MΩ.cm (Type II purified water)
Bacteria < 1cfu/ml
Organics TOC <20 ppb
Particles <0.1um
Installation requirements:
Power: Single Phase, 110-230v, +/- 10%, 50/60Hz
Feed Water: Potable
Maximum TDS (ppm): 1000
Min inlet pressure psi (bar) : 30 (2.1)
Max inlet pressure psi (bar) : 90 (6.2)
Feed water Temperature : 1-35°C