Purite Analyst 160 ECO GP

The Select Analyst water purification units by Suez are able to deliver a steady supply of > 1MΩ.cm pure water for laboratory tasks using carbon pre-treatment, reverse osmosis and deionisation. A raw water boost pump is included as standard for optimum performance.

A choice of products are available in this range with up to 48ltrs/hr output.

The Suez range is formally known under the brand of Purite. 

Features of the Select Range:

The select range of water purification systems offers a compact, robust and simple to use solution to your water purification needs. There are six models in the range: Analyst, edi 60, HP, Purewater 300, Fusion and the Neptune Ultimate.
Common features of the range include:

Systems are compact and can be bench-top or wall mounted.
Reverse osmosis (RO) boost pump is fitted as standard
RO removes >98% minerals and >99% bacteria
Comes complete with an installation kit and all consumables needs for the first years operation
LCD colour touch screen panel
Visual and audible alarms
USB port to download data and upload software updates
WiFi connectivity
Integral 20L storage containers (excludes GP models and the Neptune ultimate)
Semi-automatic cleaning cycles
ECO options available in some models


Water qualities comply with the BS EN ISO3696 and ASTM-D1193-06 industry standards. All units are manufactured within the ISO9001:2008 guidelines.

Typical Applications of Analyst Models:

Typical applications for model in this range include glassware rinsing, buffers and stains, reagent make-up, and media preparation.

Available Models + Outputs:

Analyst 40 + 40 ECO
Output at 10 °C - 3.6l/hr
Output at 25 °C - 6l/hr

Analyst 80 + 80 ECO
Output at 10 °C - 7.2l/hr
Output at 25 °C - 12l/hr

Analyst 160 + 160 ECO
Output at 10 °C - 14.4l/hr
Output at 25 °C - 24l/hr

Analyst 320
Output at 10 °C - 30l/hr
Output at 25 °C - 48l/hr

The GP models do not come with the standard 20L internal tank and as such require an external tank (50L and 100L available). New ECO models are available with a high recovery rate of up to 50% of water resulting in a reduction of drain flow and total water consumption. This can mean a potential annual saving on your water bill.


Treated Water Specification:

Inorganics > 1MΩ.cm (Type II purified water)
Bacteria 99% rejection (measured directly across the membrane)
Organics TOC 50 ppb


Installation requirements:

Power: Single Phase, 110-230v, +/- 10%, 50/60Hz 
Feed Water: Potable
Maximum TDS (ppm): 1000
Min inlet pressure psi (bar) : 30 (2.1)
Max inlet pressure psi (bar) : 90 (6.2)
Feed water Temperature : 1-35 °C