Rugged, water resistant (IP 67) designed for field use PC interface (USB / serial or analog) Data logger and alarm function (min./max.) Good Laboratory Practice (GLP-features) Clear, concise result reading: easy-to-read backlit LCD display Automatic temperature compensation Dirt-insensitive up-to-date 4-pole conductivity cell offering highest precision (SD 320 Con)
Min / Max Value Memory highest and lowest measured value is saved Auto Hold freeze and display measurement Auto Power Off if unused, the meter automatically switches off after a selected period (0 to 120 min, or deactivated) Low Battery Display €œBAT€ Automatic temperature compensation As conductivity depends strongly on temperature, each conductivity value is only valid at the corresponding temperature. Therefore the device supports temperature compensation, i.e. referring the conductivity to a reference temperature (selectable: 20 °C or 25 °C). Salinity measurement Salinity means the sum of amount of all dissolved salts in water. The unit is g / kg. TDS measurement (total dissolved solids) TDS means the mass concentration of dissolved media in a liquid. The unit is mg/l.
Range 0,000 €¦ 5,000 ¼S / cm or 0,0 €¦ 500,0 ¼S / cm ** 0 €¦ 5000 ¼S / cm * or 0 €¦ 1000 mS / cm ** Resistivity 0.005 €¦ 500.0 kOhm / cm (depends on cell constant) TDS 0 €¦ 5000 mg/l (depends on cell constant) Salinity 0.0 €¦ 70.0 (g salt / kg water equals PSU = Practical Salinity Unit) Temperature €“ 5.0 €¦ + 100.0 °C, Pt1000 or NTC (10 kOhm)
Conductivity ± 0.5 % of reading ± 0.1 % FS (depends on electrode) Temperature ± 0,2 °C (- 5,0 €¦ + 100,0 °C)
Interface / ext. supply 4-pole bayonet connector for serial interface and supply (with accessory USB 300)
Protectionclass IP67(housingandconnections) Dimensions 160x86x37mm(WxHxD) incl. protection cover Weight 250 g incl. battery and protective armouring Power supply 2 x AAA-battery (included) power consumption: < 6,25 mA Battery life 160 hours
depends on cell constant of used electrode * cell constant 0.01 / cm ** cell constant 0.1 €¦ 1.2 / cm
Servicing Options Available
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.