01954 233 110
This thin wall joint sleeve will fit inside a QuickFit glassware joint to prevent sticking without the need for grease.
An ideal choice to prevent sticking glassware without introducing grease which could contaminate the system.
The sleeves are around 0.05mm thick and will withstand low to medium vacuum application.
As the sleeves are so thin, you do not need to adjust the QuickFit fittings at all (i.e. 19/26 sockets will still fit to 19/26 cone with the sleeve in between the two)
PTFE has excellent chemical and thermal resistance.
Please Note: The products shown below are only an indication of what other customers buying this product have also bought as this may be of interest to you. They are not a recommendation or necessarily compatible.
We would appreciate your feedback.
No, thank you.