Palintest procedures are based on standard methods of analysis and equate well with the results that are obtained from conventional laboratory tests.
The results have, where applicable, been experimentally correlated with standard laboratory methods of analysis so as to provide a basis for using published fertiliser recommendation tables.
Choose from basic kits which use a combination of test kits, through to advanced kits which include photometers and meters to achieve higher accuracy results in a wider range of parameters.
NANOCOLOR Potassium 50 (REF 985045) has been improved. The change is introduced from LOT 45004, which is available from stock as of 20th July 2020.
The test is now produced with an integrated ammonium compensation. The modified recipe allows a simple determination of potassium in the presence of an ammonium interference up to a concentration of 200 mg/L NH4-N, which is unique in the market.
The use of the additional ammonium compensation reagent (REF 918045) is therefore no longer necessary. Additional information on this topic will be part of our upcoming water news mailing.
Please note, that the test procedure has changed.
An update of the photometers is not required.
Please find the new product information within the following link.
Note: Please save your special methods and measurement data prior to the update. More information can be found in the customer information
For old photometers (PF-11 etc.) asking for blank guidance is available here.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.