HI-9812-0 is an easy to use portable instrument for field measurement of pH, conductivity and TDS in water conditioning applications. This powerful instrument reduces your necessary tool set for field water quality analysis. HI-9812-0 measures pH from 0.0 to 14.0. This meter also checks conductivity and TDS from 0 to 1990 mg/L, ideal for the water conditioning field. Calibration has been simplified to one point for both pH and conductivity/TDS modes.
HI-9812-0 is equipped with Automatic Temperature Compensation to remove the effects of temperature on your conductivity and TDS measurements. In addition, the BEPS (Battery Error Prevention System) will alert the user when low batteries could affect the readings.
HI-9812-0 uses Hanna Instruments 4-in-1 replaceable HI-1285-0 probe. No probe changes are required when switching your measured parameter between pH, conductivity and TDS.
The specially engineered pH electrode also features a fiber junction and gel electrolyte for faster response and reduced contamination.
HI-9812-0 is supplied complete with pH/EC/TDS probe, HI-1285-0 with 1m (3.3') cable, pH 7 calibration (1 x 20ml), 1382 ppm and 1413 us/cm calibration solutions (1 each), cleaning solution (2pcs), blue protective case, battery and instructions.
Servicing Options Available
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.