campaignOFFERS & DEALS
local_shippingNEXT DAY & WORLDWIDE DELIVERY
buildSERVICE DEPARTMENT
loyaltyBROWSE BRANDS
Menu Mobile Camlab
campaignOFFERS & DEALS
local_shippingNEXT DAY & WORLDWIDE DELIVERY
buildSERVICE DEPARTMENT
loyaltyBROWSE BRANDS
- Home
- Products
- Water Testing
- Water Testing Kits
- Multi Parameter
- Palintest Pooltester Test Kit for Chlorine (3.0mg/l), pH and Alkalinity
Palintest Pooltester Test Kit for Chlorine (3.0mg/l), pH and Alkalinity
Palintest Pooltester Test Kit for Chlorine (3.0mg/l), pH and Alkalinity
Now
- £7.82 excl. VAT
- £9.38incl. VAT
Was
- £11.17 excl. VAT
- £13.40incl. VAT
SKU - 1177693
SP614
SKU -
1177693
11 In Stock
Add to Wish List
Add to Compare
Print PagePooltester Test Kit for Chlorine (3.0mg/l), pH and Alkalinity Complete with Rapid Reagent Tablets
Pooltester SP 614 contains:
- 20x DPD 1 tablets
- 20x Phenol Red pH tablets
- 10x Alkalinity tablets
- Testing block
- Instruction leaflet
Testing Range:
- Cl2: 0.5 - 3.0mg/l (in increments 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 3.0)
- pH: 6.8 - 8.4 (in increments 6.8, 7.0, 7.2, 7.4, 7.6, 7.8, 8.0, 8.2)
- CaCO3: 0 - 250mg/l (in increments 0, 50, 80, 100, 120, 150, 200, 250)
The Pooltester range from Palintest provides simple and cost effective pool, spa and hot tub testing, with simple to use devices that use the standard Palintest Rapid Reagent chemistries for reliable results. These Pooltester kits couldn't be simpler to use; simply dip the test block in the water, add the tablets, watch the colour develop in seconds and then read the result from the colour scale.
Features:
- Each Palintest Pooltester kit (except SP 315) is supplied in a handy pocket-sized case which may be used either free-standing or wall mounted.
- The Pooltester test blocks are manufactured in durable clear polyacrylate and have long-lasting printed colour scales.
- This range of kits is further supplemented by tests based on the Palintest tablet count method, and a test for cyanuric acid stabiliser level using a turbidity method.
- Palintest's Pooltest test kits use safe DPD and phenol red tablets for chlorine and pH testing, providing a quick and simple check on pool, hot tub or spa chemistry.
parameter, Chlorine, pH, Alkalinity
An important point to note apart from the table below please consult.
- HSE website:
- Control of legionella and other infectious agents in spa-pool systems - Code: HSG282.
- HSE advice on COVID-19 in chlorinated drinking water supplies and chlorinated swimming pools
- Swimming pool management
- The Swimming Pool and Allied Trades Association (SPATA) has a page dedicated to Coronavirus related updates.
- Pool Water Treatement Advisory Group website:
Recommended Parameter Levels for Spas
| Parameter | Â | UK Recommended Levels |
| Bromine | Â |
4-6 mg/L |
| Calcium Hardness | Â |
80 – 200 mg/L |
| Chlorine (Free and Total) |  |
|
| Cyanuric Acid | Â |
|
| pH | Â |
|
| Phosphate |  | 0.01 mg/L or below. |
| Total Alkalinity |  | 80 – 200 mg/L CaCO3 |
| Turbidity |  | 0.5 NTU (Nephelometric Turbidity Units) |
Â
Recommended Parameter Levels for Swimming Pools
| Parameter | Â | UK Recommended Levels |
| Chlorine | Â | 1.0 mg/L |
| Bromine | Â | 4-6 mg/L |
| PHMB | Â | 20-40 mg/L |
| Hydrogen Peroxide | Â | 30-100 mg/L |
| Ozone | Â | 1 mg/L for two minutes |
| pH | Â | 7.2-7.4 ideally, 7.0-7.6 is acceptable |
| Alkalinity | Â | Between 80-200 mg/L |
| Cyanuric Acid | Â | 25-50 mg/L |
| Calcium Hardness | Â | Below 80-200 mg/L |
| Phosphate | Â | Below 0.01 mg/L |
| TDS | Â | Not more than 1000 mg/L above mains water, to a maximum of 3000 mg/L |
| Salinity | Â | Between 2500-3500 mg/L |
| Turbidity | Â | Less than 0.5 NTU |
| Colony Count | Â | Not more than 10 CFU per 100 mL |
| Total Coliforms | Â | Absent in 100 mL |
| E. coli |  | Absent in 100 mL |
| Ps. Aeruginosa | Â | Absent in 100 mL |
