The Pooltester range from Palintest provides simple and cost effective pool, spa and hot tub testing, with simple to use devices that use the standard Palintest Rapid Reagent chemistries for reliable results. These Pooltester kits couldn't be simpler to use; simply dip the test block in the water, add the tablets, watch the colour develop in seconds and then read the result from the colour scale.
Features:
An important point to note apart from the table below please consult.
| Parameter | Â | UK Recommended Levels |
| Bromine | Â |
4-6 mg/L |
| Calcium Hardness | Â |
80 – 200 mg/L |
| Chlorine (Free and Total) |  |
|
| Cyanuric Acid | Â |
|
| pH | Â |
|
| Phosphate |  | 0.01 mg/L or below. |
| Total Alkalinity |  | 80 – 200 mg/L CaCO3 |
| Turbidity |  | 0.5 NTU (Nephelometric Turbidity Units) |
| Parameter | Â | UK Recommended Levels |
| Chlorine | Â | 1.0 mg/L |
| Bromine | Â | 4-6 mg/L |
| PHMB | Â | 20-40 mg/L |
| Hydrogen Peroxide | Â | 30-100 mg/L |
| Ozone | Â | 1 mg/L for two minutes |
| pH | Â | 7.2-7.4 ideally, 7.0-7.6 is acceptable |
| Alkalinity | Â | Between 80-200 mg/L |
| Cyanuric Acid | Â | 25-50 mg/L |
| Calcium Hardness | Â | Below 80-200 mg/L |
| Phosphate | Â | Below 0.01 mg/L |
| TDS | Â | Not more than 1000 mg/L above mains water, to a maximum of 3000 mg/L |
| Salinity | Â | Between 2500-3500 mg/L |
| Turbidity | Â | Less than 0.5 NTU |
| Colony Count | Â | Not more than 10 CFU per 100 mL |
| Total Coliforms | Â | Absent in 100 mL |
| E. coli |  | Absent in 100 mL |
| Ps. Aeruginosa | Â | Absent in 100 mL |
Add to Wish List
Add to Compare
Print Page