Pooltest Minikit for Chlorine and pH Complete with Rapid Reagent Tablets

£4.24 excl. VAT
£5.09
incl. VAT

£6.06 excl. VAT
£7.27
incl. VAT

SKU - 1177690

SP600

SKU -

1177690

8 In Stock

The Pooltester range from Palintest provides simple and cost effective pool, spa and hot tub testing, with simple to use devices that use the standard Palintest Rapid Reagent chemistries for reliable results. These Pooltester kits couldn't be simpler to use; simply dip the test block in the water, add the tablets, watch the colour develop in seconds and then read the result from the colour scale.

Features:

Each Palintest Pooltester kit (except SP 315) is supplied in a handy pocket-sized case which may be used either free-standing or wall mounted.
The Pooltester test blocks are manufactured in durable clear polyacrylate and have long-lasting printed colour scales.
This range of kits is further supplemented by tests based on the Palintest tablet count method, and a test for cyanuric acid stabiliser level using a turbidity method.
Palintest's Pooltest test kits use safe DPD and phenol red tablets for chlorine and pH testing, providing a quick and simple check on pool, hot tub or spa chemistry.

An important point to note apart from the table below please consult.

HSE website:

The Swimming Pool and Allied Trades Association (SPATA) has a page dedicated to Coronavirus related updates.
Pool Water Treatement Advisory Group website:

Recommended Parameter Levels for Spas

Parameter		UK Recommended Levels
Bromine		4-6 mg/L
Calcium Hardness		80 – 200 mg/L
Chlorine (Free and Total)		Free chlorine 3.0 – 5.0 mg/L Combined Chlorine Below 1 mg/L
Cyanuric Acid		Below 200 mg/L - Acceptable 25 and 50 mg/L - Idea
pH		7.2 – 7.4 - Idea 7.0 – 7.6 - Acceptable
Phosphate		0.01 mg/L or below.
Total Alkalinity		80 – 200 mg/L CaCO3
Turbidity		0.5 NTU (Nephelometric Turbidity Units)

Recommended Parameter Levels for Swimming Pools

Parameter		UK Recommended Levels
Chlorine		1.0 mg/L
Bromine		4-6 mg/L
PHMB		20-40 mg/L
Hydrogen Peroxide		30-100 mg/L
Ozone		1 mg/L for two minutes
pH		7.2-7.4 ideally, 7.0-7.6 is acceptable
Alkalinity		Between 80-200 mg/L
Cyanuric Acid		25-50 mg/L
Calcium Hardness		Below 80-200 mg/L
Phosphate		Below 0.01 mg/L
TDS		Not more than 1000 mg/L above mains water, to a maximum of 3000 mg/L
Salinity		Between 2500-3500 mg/L
Turbidity		Less than 0.5 NTU
Colony Count		Not more than 10 CFU per 100 mL
Total Coliforms		Absent in 100 mL
E. coli		Absent in 100 mL
Ps. Aeruginosa		Absent in 100 mL

Title	Measuring Range/Colour scales	Method number
MINIKIT AF 413	Alkalinity-m 10 - 500 mg/l CaCO₃	Test Kit
MINIKIT AF 444	Alkalinity-m 20 - 800 mg/l CaCO₃	Test Kit
MINIKIT AF 444	Acid capacity KS4.3 0.4 - 16 mmol/l	Test Kit
MINIKIT AF 414	Alkalinity-p 20 - 500 mg/l CaCO₃	Test Kit
MINIKIT AF 422	Cyanuric acid 20 - 200 mg/l CyA	Test Kit
MINIKIT AF 418	Chloride 5 - 5000 mg/l Cl^-	Test Kit
MINIKIT AF 416	Hardness, calcium 10 - 500 mg/l CaCO₃	Test Kit
MINIKIT AF 425	Hardness, total, low 1 - 50 mg/l CaCO₃	Test Kit
MINIKIT AF 426	Hardness, total, very low 1 - 10 mg/l CaCO₃	Test Kit
MINIKIT AF 446	Hardness, calcium 20 - 800 mg/l CaCO₃	Test Kit
MINIKIT AF 423	Limit 4, 8 or 20 mg/l CaCO₃	Test Kit
MINIKIT AF 445	Hardness, total 20 - 800 mg/l CaCO₃	Test Kit
MINIKIT AF 424	Hardness, total 10 - 500 mg/l CaCO₃	Test Kit
MINIKIT AF 415	Alkalinity caustic-p 20 - 500 mg/l CaCO₃	Test Kit
MINIKIT AF 427	Nitrite 70 - 1500 mg/l NaNO₂	Test Kit
MINIKIT AF 411	Organo phosphonate 1 - 20 mg/l PO₄	Test Kit
MINIKIT AF 417	QAC (Qaternary ammonia compounds) 20 - 500 mg/l QAC	Test Kit
MINIKIT AF 410	Acid concentration 0.75 - 10 %	Test Kit
MINIKIT AF 432	Sulphate, low 20 - 200 mg/l Na₂SO₄	Test Kit
MINIKIT AF 431	Sulphate, high 40 - 4000 mg/l SO₄	Test Kit
MINIKIT AF 434	Sulphite, low 2 - 50 mg/l Na₂SO₃	Test Kit
MINIKIT AF 435	Sulphite, high 20 - 500 mg/l Na₂SO₃	Test Kit
MINIKIT AF 436	Tannin index 2 - 20 Einheiten	Test Kit
MINIKIT AF 575	DEHA 0.05 - 1 mg/l DEHA	Test Kit