£934.10 excl. VAT
£1,120.92 inc. VAT
The Pooltest 25 is Palintest’s top of the range pool photometer, covering the complete range of water testing parameters for professional pool and spa management.
Waterproof, durable and versatile
Suitable for poolside use, Palintest photometers are known for their robust design. With the complete range of pool parameters, test for additional parameters without purchasing new hardware.
Protect pool users and pool infrastructure
The Pooltest 25 enables full disinfection and water balance control; to protect pool users and prevent scaling or corrosion of the pool.
Manage data across multiple platforms
The Pooltest 25 stores up to 1000 data sets for full traceability of results. Utilise Bluetooth® to connect your devices and manage data via the Aqua Pal App and Palintest Portal.
Suitable for poolside use
Palintest photometers are waterproof certified to IP67. Choose the Standard or Engineers kit options to safely store and carry your photometer.
Digital measurement for increased safety
Palintest photometers combines expert colorimetric analysis with digital measurements to deliver clear results with no uncertainty from the user.
For parameter ranges, please view Photometer reagents
Below is a selection of videos from Palintest to help when using their photometers:
Palintest currently provides six photometers to choose from, depending on what you want to test for:
|Copper (free, combined & total)||✓||✓||✓|
|Free Chlorine (standard range)||✓||✓||✓||✓||✓||✓|
|Free Chlorine (extended range)||✓||✓||✓||✓||✓||✓|
|Hydrogen Peroxide HR||✓|
|Langelier Saturation Index||✓||✓||✓|
|pH Phenol Red||✓||✓||✓||✓||✓|
|Total Chlorine (standard range)||✓||✓||✓||✓|
|Total Chlorine (extended range)||✓||✓||✓||✓|
An important point to note apart from the table below please consult.
|Parameter||UK Recommended Levels|
80 – 200 mg/L
|Chlorine (Free and Total)||
|Phosphate||0.01 mg/L or below.|
|Total Alkalinity||80 – 200 mg/L CaCO3|
|Turbidity||0.5 NTU (Nephelometric Turbidity Units)|
|Parameter||UK Recommended Levels|
|Hydrogen Peroxide||30-100 mg/L|
|Ozone||1 mg/L for two minutes|
|pH||7.2-7.4 ideally, 7.0-7.6 is acceptable|
|Alkalinity||Between 80-200 mg/L|
|Cyanuric Acid||25-50 mg/L|
|Calcium Hardness||Below 80-200 mg/L|
|Phosphate||Below 0.01 mg/L|
|TDS||Not more than 1000 mg/L above mains water, to a maximum of 3000 mg/L|
|Salinity||Between 2500-3500 mg/L|
|Turbidity||Less than 0.5 NTU|
|Colony Count||Not more than 10 CFU per 100 mL|
|Total Coliforms||Absent in 100 mL|
|E. coli||Absent in 100 mL|
|Ps. Aeruginosa||Absent in 100 mL|
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
Products in this Range