There are many factors affecting the comfort and sanitation of pool and spa water and the functioning of the equipment and structures that hold it. A variety of test kits can be used to measure these factors, but the powerful POOLPRO is the most comprehensive testing tool available for any pool or spa. You get fast, lab-accurate results for up to 6 parameters: pH, TDS, ORP, Mineral/ Salt Concentration, Conductivity, and Temperature.
POOLPRO is lightweight, portable, buoyant, waterproof, easy-to-calibrate, and easy-to-use.
Simply rinse and fill the cell cup by dipping the POOLPRO in the water, then press the button of the parameter you wish to measure. You immediately get a standard, numerical digital readout â€” eliminating all subjectivity.
Up to 100 date and time stamped readings can be stored in POOLPROâ€™s non-volatile memory.
Conductivity; Range 0-9999 ÂµS/cm and 10-200 mS/cm in 5 autoranges
TDS; 0-9999 ppm and 10-200 ppt in 5 autoranges
Mineral/Salt; 0-9999 ppm and 10-200 ppt in 5 autoranges
ORP; Â±999 mV
Free Chlorine; 0.00 - 9.99ppm
Alkalinity Titration; 10-800 ppm
Hardness Titration; 0-1710 ppm, 0-100 grains
Temperature; 0-71Â°C 32-160Â°F
Servicing Options Available
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.