- Home
- Products
- Water Testing
- COD & BOD
- OxiTop-i SET 6 - Extension Set no Platform, including Heads Bottles
OxiTop-i SET 6 - Extension Set no Platform, including Heads Bottles
- £2,211.44 excl. VAT
- £2,653.73incl. VAT
Add to Wish List
Add to Compare
Print PageOxiTop-i SET 6 - Extension Set without Platform, including Heads and Sample Bottles BOD instrument for self-check with 6 sets of measuring units, with direct display of the BOD value at the measuring head
- OxiTop®-i measuring heads
- Sample Bottles
Menu-operated, with backlit graphic LCD, control LED, operating buttons, for direct BOD readings, volume pre-selection, measurement duration between 1 and 7 days selectable, display of measuring curve, display of current readings.
The new Respirometric OxiTop®-i is a modern easy-to-use instrument for BOD measurement (Biochemical Oxygen Demand). This measuring system for BOD self checks measurement with undiluted samples (DIN EN 1899 -2) - measuring ranges up to 4,000 mg/l BOD possible. Measurement can be done over one to seven days.
The sample volume to test can be selected in the menu, the subsequent conversion into the corresponding BOD value will be automatic, error-free and convenient. A small LED provides inform on the actual operating condition of the head.
Unmistakable
The heads with two colors in a modern design with adjustable numeric sample ID support the distinction between inlet and outlet.
Key Features
- No need to convert data - direct input of sample volume
- Most reliable results - display of the curve at the head
- Full information - interim values always available
OxiTop-i IS 6 Specificity
- Measurement range (hPa): 500 to 1250
- Selectable time span (days): 1 to 7
- Selectable sample volume (ml): 22.7 ; 43.5 ; 97.0 ; 164 ; 250 ; 365 ; 432
- BSB range: 0 to 4000 mg/l
- Display: LCD , backlit, menu control
- Control-LED: RGB
- Battery: 1 x CR 2450
Biochemical oxygen demand (BOD) is an important measurement parameter for anyone discharging effluent or running a waste water treatment plant. It is a difficult test to run and there are very few resources online which help new users get to grips with the technique.
Camlab offer a range of different analysis options for BOD to suit all types of user. The options are outlined below; from traditional bottle and multi-meter based set ups to bespoke all in one systems. Camlab can offer both demonstrations and advice to new and existing users, which will allow them to get the best results from this difficult analysis.
Multi-Meter Based
Ideal for single BOD sample analysis along with the ability to measure other parameter analysis (pH, ISE etc.). Camlab supplies several options from market leaders.
Hach Multi-Meters and DO Probes
The IntelliCAL LBOD101 Luminescent Dissolved Oxygen Probe can be used with:
WTW Multi-Meters and DO Probes
Several combinations are available:
- StirrOx® G self-stirring dissolved oxygen sensor:
- Bench top inoLab OXi7310
- FDO925 cabled and F925-P wireless:
Lovibond Multi-Meters and DO Probes
SD 400 Optical Dissolved Oxygen meter series:
All multi-meter options require accessories, Bod bottles and reagents.
Bespoke Systems
Ideal for single and multiple sample analysis.
Lovibond BD 600 Series
The BD 600 is a respirometric system for the determination of Biochemical Oxygen Demand (BOD). The BD600 is equipped with an automatic start feature, measurement does not start until the temperature in the samples is the same as that in the thermostatically controlled cabinet. The system comes with all you need for analysis of 1-6 samples.
WTW Oxitop System
The unique feature of this system is that the heads contain the sensor and a measuring unit for independent setting and recording allowing a more flexible system. Options include:
- Oxitop-i IS -The OxiTop-i system is an easy-to-use BOD meter - Blue/Grey
- Oxitop-IDS - The OxiTop-IDS provides versatility in measuring all kinds of aerobic degradation using different setups with Bluetooth connectivity to Multi 3630 IDS and Multi 3620 IDS meters. - Orange
Various system options available – contact us for details.
For an overview of the set up please watch the following Video.
Both bespoke systems have an extensive selection of accessories which includes their own brown glass flasks, overflow measuring flasks, stirring unit and reagents such as nitrification inhibitor and potassium hydroxide solution 45%. A thermostatic cabinet is an additional consideration.
