2 cuvettes (A | B) with similar COD-concentrations. The turbidity in cuvette B influences the result up to 30 %.
For current instructions please download the following file: Frimware update.
Photometer updateImportant firmware update for spectrophotometer NANOCOLOR® UV/VIS! As of now a new firmware update (version 8.0.3) is available. Please update your NANOCOLOR® spectrophotometer, so your device is up to date and our latest firmware optimizations are available on your NANOCOLOR® UV/VIS.
Important note UV/VIS and VIS update 1:
After the successful update of the photometer a zero calibration is required. Please use the calibration cuvette delivered with the photometer and follow the display instructions for zero calibration.
Important note UV/VIS and VIS update 2:
The current update performs an automatical system reset on your photometer! Be sure to save your data and user-defined methods on your PC before updating the device! Important note UV/VIS and VIS update 3: If you use the MACHEREY-NAGEL PC-Software for spectrophotometers together with your photometer, an instrument update requires also an update of the PC-Software (V 7.0.0). The instrument's new data set can only be exported into and read by the new PC-Software version.
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
NANOCOLOR Potassium 50 (REF 985045) has been improved. The change is introduced from LOT 45004, which is available from stock as of 20th July 2020.
The test is now produced with an integrated ammonium compensation. The modified recipe allows a simple determination of potassium in the presence of an ammonium interference up to a concentration of 200 mg/L NH4-N, which is unique in the market.
The use of the additional ammonium compensation reagent (REF 918045) is therefore no longer necessary. Additional information on this topic will be part of our upcoming water news mailing.
Please note, that the test procedure has changed.
An update of the photometers is not required.
Please find the new product information within the following link.
Note: Please save your special methods and measurement data prior to the update. More information can be found in the customer information
For old photometers (PF-11 etc.) asking for blank guidance is available here.
Have you considered your servicing requirements? Much like a car, scientific instruments may need a bit of care to keep them working reliably and at their most accurate.
The Camlab Service Department have over 60 years experience in scientific instrumentation. We have a number of highly qualified internal and field-based service engineers able to perform a variety of jobs including preventative maintenance servicing and calibration.
Camlab can offer yearly service contracts which include two main types of preventative maintenance/calibration services – the back to base service and an engineer visit to your site. These options are can be offered with differing turn around times depending on the instrument type and your requirements along with loan instruments if available.
A typical preventative maintenance service includes the following:
Inspection and testing of the unit
Dismantling, cleaning and inspection of the key parts
Correction of minor defects including adjustments if necessary
Reassembly and testing
Take post adjustment / cleaning readings
Supply of calibration certificate
Return of the item to you (back to base services)
Request a quote for your servicing requirements today.
Check items to add to the cart
NANOCOLOR VARIO 4 Heating Block
£2,445.73 excl. VAT
£2,934.88 inc. VAT
NANOCOLOR VARIO C2 M Heating block
£1,464.75 excl. VAT
£1,757.70 inc. VAT
NANOCOLOR VARIO HC Heating block
£3,802.98 excl. VAT
£4,563.58 inc. VAT
Heating block NANOCOLOR VARIO C2
£1,532.27 excl. VAT
£1,838.72 inc. VAT
NANO Glass cell optical path: 50 mm
£200.96 excl. VAT
£241.15 inc. VAT
NANOCOLOR COD Tests
£22.22 excl. VAT
£26.66 inc. VAT
NANOCOLOR Formaldehyde Tests
£70.63 excl. VAT
£84.76 inc. VAT
£33.94 excl. VAT
£40.73 inc. VAT
NANOCOLOR Sulfate Test
£73.69 excl. VAT
£88.43 inc. VAT
NANOCOLOR ortho Phosphate Standard Test
£68.64 excl. VAT
£82.37 inc. VAT
NANOCOLOR TOC Tests
£124.90 excl. VAT
£149.88 inc. VAT
Macherey Nagel NANOCOLOR Heating Blocks
£537.52 excl. VAT
£645.02 inc. VAT
NANOCOLOR Nitrite Tests
£69.09 excl. VAT
£82.91 inc. VAT
NANOCOLOR Copper Tests
£86.22 excl. VAT
£103.46 inc. VAT
NANOCOLOR Ammonium Tests
£82.56 excl. VAT
£99.07 inc. VAT
NANOCOLOR Nitrate Tests
£91.74 excl. VAT
£110.09 inc. VAT
NANOCOLOR hydrocarbons Reagent set for extraction HC from soil
£257.54 excl. VAT
£309.05 inc. VAT
NANOCOLOR USB T-Set for temperature calibration of heating blocks
£494.52 excl. VAT
£593.42 inc. VAT
NANOCOLOR Standard test Fluoride
£89.99 excl. VAT
£107.99 inc. VAT
NANOCOLOR Disposable plastic cells optical path: 10 mm, pack of 100
£38.37 excl. VAT
£46.04 inc. VAT