NANOCOLOR VARIO Mini 6 bore holes Heating block

Technical Data:

• Instrument: NANOCOLOR® VARIO Mini
• Type: Heating block for chemical-analytical digestion with 6 bore holes for tubes with 16 mm OD
• Display: Graphic display 128 x 64 Pixel
• Operation: Icon-based menu guidance via 4 buttons
• Temperatures: 70 °C / 100 °C / 120 °C / 148 °C / 150 °C / 160 °C
• Temperature stability: ± 1 °C (according to DIN, EN, ISO and EPA methods)
• Warm-up time: from 20 °C to 160 °C within 25 min
• Heating times: 30 min / 60 min / 120 min
• Safety: Protective cover with magnetic locking; overtemperature protection
• Interface: Mini-USB-OTG (On-The-Go) interface; Connectivity for NANOCOLOR® USB T-Set (REF 919 921; Facility for an automated calibration and creation of a test certificate for inspection equipment monitoring)
• Analytical quality control: With NANOCOLOR® USB T-Set (REF 919 921), optional fully automatic calibration and preparation of test certificates for instrument control and monitoring according to ISO 9001)
• Update: Via Internet and USB-Stick
• Operating range: 10 °C €“ 40 °C; max. 80 % relative humidity (without condensation)
• Power supply: 12 V DC 5A
• Power consumption: 60 W
• Dimensions (B x T x H): 105 x 125 x 170 mm
• Weight: 670 g
• Quality mark: CE
• Warranty: 2 years

Reagents for Macherey Nagel water test systems

NANOCOLOR® Reagent Tube Tests

• A list of all NANOCOLOUR Reagents Tube Tests
• NANOCOLOR STANDARD TESTS
• NANOCOLOR Labelling Explained

NANOCOLOR® Equipment

• NANOCOLOR Compact Multiparameter photometers - PF-3
• NANOCOLOR Compact Multiparameter Photometer - PF-12 Plus (with Turbidity Check)
• NANOCOLOR Spectrophotometers - VIS II & UV/VIS II (with Turbidity Check)
• NANOCOLOR Heating Blocks - VARIO 2, 4, HC, Mini

Software Downloads

Compact Multiparameter Photometer PF-12 Plus

• Download Parameter update
• Download Firmware update
• Download Data export software

For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.

Approved

Reliable and comparable results

The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.

Precise

Easy handling and highest accuracy

All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.

Versatile

The perfect test for every request

For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.

Unique

No mix up of tests Every

NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.

A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.