- Home
- Products
- Lab Equipment
- Heating Blocks & Digestion
- Digestion Apparatus
- NANOCOLOR VARIO HC Heating block
NANOCOLOR VARIO HC Heating block
- £5,184.61 excl. VAT
- £6,221.53incl. VAT
Add to Wish List
Add to Compare
Print PageHeating block with cooling system
€¢ Active rapid cooling after the heating process
€¢ Electronic safety locks
€¢ Touch screen with intuitive user guidance
€¢ High-speed digestions in 30 minutes
Technical Data
- Type: Heating block NANOCOLOR® VARIO HC €“ with cooling system €“ 12 holes for test tubes with 16 mm OD (outer diameter) and aerator
- Display: Coloured, backlit LCD touch screen
- Temperatures: 5 pre-programmed temperatures: 70 / 100 / 120 / 148 / 160 °C, 7 free memory locations for individual temperature settings
- Temperature range: 40 €“ 160 °C (1 °C increments)
- Temperature stability: ± 1 °C (according to DIN, EN, ISO and EPA methods)
- Warm-up time: From 20 °C to 160 °C within 10 minutes
- Heating times: 4 pre-programmed heating times: 30 min / 60 min / 120 min / cont., 8 free memory locations for individual heating times
- Time range: 0h:01min€“9h:59min (increments 0h:01min)
- Cooling time: From 160 °C to 50 °C within 10 minutes
- Fan speed: 3 steps (low, medium, high)
- Fan off: Between 20€“150 °C
- Safety: Replaceable safety covers as contact protection, Lockable protective lids, Overheating protection
- Interfaces: Bidirectional serial RS 232, USB A (master) and USB B (slave)
- Analytical quality control: With NANOCOLOR® T-Set (REF 919 917), fully automatic calibration and test certificate generation
- Update: Via internet and USB stick
- Power supply: 110 €“ 230 V~, 50/60 Hz
- Power consumption: 150/550 VA
- Dimensions (W x D x H): 290 x 287 x 146 mm
- Weight: ca. 3.2 kg
- Warranty: 2 years
- CE: CE Certified
Experienced and flexible
- Pre-programmed standard programmes for all routine digestions
- Easy to programme for user-defined methods
- Performance of all required digestions with only one instrument
Simple and fast
- Operation via touch screen with intuitive menu guidance
- Very short warm-up times
- Procedure of all routine decompositions in only 30 minutes
Controlled and safe Reliable and versatile
- Electronic temperature control and fully automatic calibration with the NANOCOLOR T-Set
- Extra thick safety covers on the surface of the heating blocks as protection against contact
- Electronical protection against excess temperature
Reliable and versatile
- Constant digestion conditions with high temperature stability
- Suitable for all NANOCOLOR digestion methods
Suitable NANOCOLOR digestion methods
- COD (DIN ISO 15705)- 148 °C 120 min
- High-speed COD- 160 °C 30 min
- TOC- 120 °C 120 min
- total-Nitrogen- 120 °C 30 min
- total-Phosphorous- 120 °C 30 min
- Organic acids- 100 °C 10 min
- Total-Metals (Cadmium, Chromate, Iron, Cobalt, Copper, Nickel, Zinc)- 120 °C 30 min
- AOX- 120 °C 30 min
- Hydrocarbons- 148 °C 120 min
- Programmable, user-defined programs 40 °C - 160 °C 0h:01min - 9h:59min
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
- A list of all NANOCOLOUR Reagents Tube Tests
- NANOCOLOR STANDARD TESTS
- NANOCOLOR Labelling Explained
NANOCOLOR® Equipment
- NANOCOLOR Compact Multiparameter photometers - PF-3
- NANOCOLOR Compact Multiparameter Photometer - PF-12 Plus (with Turbidity Check)
- NANOCOLOR Spectrophotometers - VIS II & UV/VIS II (with Turbidity Check)
- NANOCOLOR Heating Blocks - VARIO 2, 4, HC, Mini
Software Downloads
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Approved
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Precise
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
Versatile
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
Unique
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
| For more information on this product please click the Request information button below and we will get back to you as soon as we can. |
| Request information |
Alternatively, a consultation visit from one of our highly experienced product specialists is available for this range. Typically our specialist will be able to go through the following aspects with you to help you make the right choices and be able to deliver them on time and and on budget.
|
| Request Consultation |
| The links above will take you to our request information page which will forward your enquiry to our team. Please provide as much detail as possible so that we can get back to you with the right information. We normally aim to get back to you same day or within 24 hours on weekdays. If you enquiry is more urgent please call our support team on 01954 233 120 |
