Data
The determination of TOC is carried out in two steps:
Chemicals and Accessories for Special Procedures Contact support@camlab.co.uk for further information | |||
Description | Pack of | No. of tests | REF |
AOX | |||
Auxiliary chemicals for AOX determination | |||
Supplement kit for AOX* for the sensitive AOX range (0.01 €“ 0.30 mg/L AOX) as well as for higher COD values (required above 50 mg/L COD) | 2 x 4 g | 20 | 918072 |
Chloride detection kit for AOX®, for samples with high chloride contents | 10 mL | 918073 | |
Analytical accessories for the AOX test | |||
Starter set for AOX, consists of tweezers, funnel, cartridge adaptor, beaker, glass rods, 1-litre bottle and syringes | 1 set | 916111 | |
Pump set for AOX, consists of a centrifugal pump, connecting tubes, graduated 1-litre reservoir with tap and stand with clamps and bosses | 1 set | 916115 | |
NANOCOLOR® cartridge adapter for AOX pump-set | 1 | 916113 | |
BOD5 | |||
Reagents for preparation of the inoculating water for BOD5 test 8-22 | |||
BOD5 nutrient mixture (without N-allylthiourea [NATU]) | 20 cuvettes | 20 €“ 80 | 918994 |
BOD5 nutrient mixture PLUS (with N-allylthiourea [NATU]) | 20 cuvettes | 20 €“ 80 | 918995 |
Accessories for BOD5 determination | |||
BOD5 accessories set, consists of an electric air pump, 10-litre PE container, 2 aerating bricks, 1-litre laboratory bottle, 4 Winkler bottles | 1 set | 916918 | |
BOD5-TT accessories set, consists of an electric air pump, 2 aerating bricks, 1-litre PE container, 2 reaction vessels (40 mL) | 1 set | 916925 | |
Reaction vessels for BOD5-TT | 10 | 916926 | |
Oxygen bottles according to Winkler (250 €“ 300 mL) | 4 | 916919 | |
Aerating bricks for BOD5 determination | 4 | 916920 | |
COD | |||
Auxiliary chemicals for COD determination | |||
Chloride complexing agent* for chloride concentration of 1000 €“ 7000 mg/L Cl- | 100 mL | 100 | 918911 |
Cartridges for chloride elimination of up to 2000 mg/L chloride per cartridge | 10 | 10 | 963911 |
COD- and TOC-free water | 50 mL | 918993 | |
Accessories for COD determination | |||
Safety bottle for shaking COD tubes | 1 | 91637 | |
Hydrocarbons | |||
Kits for extraction of hydrocarbons for test 0-57 | |||
Extraction HC from water* | 1 box | 20 | 918571 |
Extraction HC from soil* | 1 box | 20 | 918572 |
Analytical accessories for the hydrocarbon test | |||
Separation funnel 500 mL with PTFE tap and glass stopper | 2 | 91608 | |
CHROMABOND® column 45 mL with 4 g aluminium oxide ALOX N for purification of water and soil extracts by solid phase extraction | 20 | 730250 | |
Syringe adaptor for CHROMABOND® columns 45 mL | 2 | 91603 | |
Plastic syringes 50 mL | 10 | 91609 | |
Stop valve for pipette tips for low-viscosity liquids | 100 | 91621 | |
Threaded union for coupling the sample tube with the COD tube | 2 | 91604 | |
Soxhlet apparatus 30 mL, with 100 mL round flask with flat bottom and condenser (3 parts); additionally a heater is required | 1 set | 91605 | |
Extraction thimbles MN 645 23 mm ø x 100 mm | 25 | 645008 | |
Measuring flask 50 mL with PE stopper | 2 | 91606 | |
TOC | |||
Analytical accessories for the TOC test | |||
NANOCOLOR® TIC-Ex for removal of TIC, composed of: NANOCOLOR® TIC-Ex, cuvette holder, manual, power cable and certificate | 1 | 916993 | |
Manual forNANOCOLOR® TIC-Ex | 1 | 916994 | |
Cuvette holder forNANOCOLOR® TIC-Ex | 1 | 916995 | |
Power supply for QUANTOFIX® Relax and NANOCOLOR® TIC-Ex | 1 | 930995 | |
Pipette tips for NANOCOLOR® TIC-Ex | 20 | 916997 | |
Pipette tips for NANOCOLOR® TIC-Ex | 200 | 916998 | |
Cover for NANOCOLOR® VIS for TOC determination | 1 | 916996 | |
Holder for 15 round glass tubes and 2 tubes | 1 | 91623 | |
NANOCOLOR® accessory set for TOC (small), content: 1 magnetic stirrer (1 stir position), 2 beakers 100 mL, 2 magnetic stir bars 35 mm | 1 set | 916990 | |
NANOCOLOR® accessory set for TOC (big), content: 1 magnetic stirrer (15 stir positions), 6 beakers 100 mL, 6 magnetic stir bars 35 mm | 1 set | 916991 | |
NANOCOLOR® beaker 100 mL with magnetic stir bar 35 mm | 2 | 916992 | |
NANOCOLOR® thermocaps for TOC determination | 3 | 916116 | |
Special chemicals for the elimination of disturbances | |||
Distilled water | 1 L | 918932 | |
Silica-free water | 1 L | 918912 | |
Isobutyl methyl ketone (MIBK)* for phenol test 0-74 | 100 mL | 918929 | |
Reagents for sample preparation | |||
Carrez solutions 1 + 2, for nitrite in cooling lubricants, seepage water from waste deposits etc | 2 x 30 mL | 30 | 918937 |
Removal of interfering calcium for determinations of copper, nickel and zinc | 100 g | 20 | 918939 |
Amidosulphuric acid* | 25 g | 918973 | |
Ammonium-compensation-reagent* | 30 mL | 100 | 918045 |
Cadmium-compensation-reagent | 20 NANOFIX | 20 | 918942 |
Accessories for extraction methods | |||
100 mL separation funnel with NS glass tap and PE stopper for extraction methods | 2 | 91664 | |
Stand with clamps and bosses for 4 separation funnels, height 70 cm | 1 | 91695 |
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
NANOCOLOR® Equipment
Software Downloads
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Approved
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Precise
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
Versatile
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
Unique
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
Extraction thimbles are often used for holding solid materials, from which certain substances are to be eluted (extracted) with a suitable solvent. Additionally, extraction thimbles are used in the fields of air and waste gas analysis for collecting solid particles (dust).
Grade | Properties |
MN 645 | standard grade, extraction thimbles made from pure cellulose |
MN 645 D | extraction thimbles MN 645 with lid to prevent loss of contents |
MN 645 F | extraction thimbles made from cellulose, denser than MN 645 |
MN 645 W | extraction thimbles made from cellulose, more permeable than MN 645 |
MN 645 R | extraction thimbles MN 645 with sealing collar and two finger recesses on opposite sides of the collar, for dust analysis in industrial gases, exhaust gases and room air |
Grade | Properties |
MN 649 | extraction thimbles made from glass microfibres without binder, short term temperature resistance up to 500 °C, very high particle retention, for dust analysis in hot exhaust gases |
MN 649 R | extraction thimbles MN 649 with sealing collar and two finger recesses on opposite sides of the collar, for dust analysis in industrial gases, exhaust gases and room air |
Related Products
Check items to add to the cart