- Home
- Products
- Water Testing
- Water Testing Reagents
- Spectrophotometer and Colorimeter Reagents
- NANOCOLOR ortho and total Phosphate 5 tube test 20 Tests
NANOCOLOR ortho and total Phosphate 5 tube test 20 Tests
- £119.09 excl. VAT
- £142.91incl. VAT
Add to Wish List
Add to Compare
Print PageDIN method: ammonium molybdate reacts with orthophosphate ions to form phosphomolybdic acid. This is reduced to molybdenum blue. For the determination of total phosphate, an acidic oxidation at 100 €“ 120 °C must preceed to detect poly- and organic phosphates. (Reaction basis according to DIN EN ISO 6878-D11).
Data- Reference Code: 985081
- Type: 0.20 €“ 5.00 mg/l P (PO4-P) 0.5 - 15.0 mg/l PO43-
- Sufficient for: 20 tests
- Shelf life: at least 1 year
- Sea water suitability: yes (ortho-P)
DIN method: ammonium molybdate reacts with orthophosphate ions to form phosphomolybdic acid. This is reduced to molybdenum blue. For the determination of total phosphate, an acidic oxidation at 100 €“ 120 °C must preceed to detect poly- and organic phosphates. (Reaction basis according to DIN EN ISO 6878-D11).
Data- Reference Code: 985081
- Type: 0.20 €“ 5.00 mg/l P (PO4-P) 0.5 - 15.0 mg/l PO43-
- Sufficient for: 20 tests
- Shelf life: at least 1 year
- Sea water suitability: yes (ortho-P)
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
- A list of all NANOCOLOUR Reagents Tube Tests
- NANOCOLOR STANDARD TESTS
- NANOCOLOR Labelling Explained
NANOCOLOR® Equipment
- NANOCOLOR Compact Multiparameter photometers - PF-3
- NANOCOLOR Compact Multiparameter Photometer - PF-12 Plus (with Turbidity Check)
- NANOCOLOR Spectrophotometers - VIS II & UV/VIS II (with Turbidity Check)
- NANOCOLOR Heating Blocks - VARIO 2, 4, HC, Mini
Software Downloads
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Approved
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Precise
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
Versatile
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
Unique
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.
Related Products
Check items to add to the cart
