Formaldehyde has technically been produced for approx. 100 years and is used as raw material for resins, as binding material for wood-based panels (chipboards), for textile treatment, for disinfection and conservation and as raw material for medicinal products and explosives. Particularly in wood and chipboard industry, the content of formaldehyde must be determined and threshold values must be observed. Chipboards are the main source of formaldehyde in living spaces.
Chipboards and other wood-based panels, like plywood or blockboards are often glued with binding materials based on formaldehyde which are easy and cheap to produce. To produce these binding materials, formaldehyde is spiked with urea, whereby water is formed, which dries afterwards. This process is reversible so that during the lifetime of such wood-based panels the influence of air humidity leads to a digestion of the binding material to formaldehyde and urea. The resulting formaldehyde gases out from the wood-based panel. This process takes place during the whole service life of the panel, as long as there is binding material in the panel.
The classification of wood-based panels is done with the standardised perforator method (DIN EN 120 €“ Wood-based panels €“ Determination of formaldehyde content, Extraction method called the perforator method).
Reagents for Macherey Nagel water test systems
NANOCOLOR® Reagent Tube Tests
Compact Multiparameter Photometer PF-12 Plus
For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
Reliable and comparable results
The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.
Easy handling and highest accuracy
All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.
The perfect test for every request
For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.
No mix up of tests Every
NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.
A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.