< View All 'Spectrophotometer and Colorimeter Reagents

NANOCOLOR COD 4000 tube test range: 400-4000 mg/L O2 20 Tests

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Machery Nagel NANOCOLOR COD 60000 tube test range: 5.0-60.0 g/L O2 20 Tests from Camlab

NANOCOLOR COD 4000 tube test range: 400-4000 mg/L O2 20 Tests

£93.07 excl. VAT
£111.68
incl. VAT

SKU - 1222768

985011

SKU -

1222768

Order now for 9 day delivery

This Test is suitable for short time COD at 160°C within 30 minutes.

In contrast to the conditions described in the ISO 15705, the short time COD is characterised by a higher digestion temperature and reduced reaction time. Therefore we recommend comparing the results of the short time COD from time to time with measurements made under the conditions of ISO 15705 (150 ± 5°C / 2h ± 10 min).

Benefits of NANOCOLORtube tests in comparison to ISO 6060:

The new ISO 15705 is based on the same chemical reaction as the established ISO 6060. The water contents are oxidized by sulfuric acid and potassium dichromate in the presence of silver sulfate and mercury(II) sulfate. Compared with the ISO 6060, the new method, described in the ISO 15705 has significant advantages:

€¢ Five times less mercury

€¢ Comparably less other toxic and hazardous reagents

€¢ All reagents are pre-dosed in round tubes

€¢ Reduced risks for the user

€¢ Reproducible results because of photometric determination

If the chloride content exceeds 1500 mg/L the sample has to be diluted with COD-free water, or you may use the chloride complexing agent. Lower chloride concentrations are masked by the mercury(II) sulfate present in the test tubes.

Please note COD accessories:

Chloride complexing agent REF 918 911

for COD determinations with chloride concentrations from 1000€“7000 mg/L Cl€“

Sufficient for: 100-200 tests
Shelf life: at least 1.5 years

Cartridges for chloride elimination REF 963 911

for removal of up to 2000 mg/L Cl€“ per cartridge

Pack of: 10 cartridges
Shelf life: at least 1 year at 2€“8 °C

COD-free water REF 918 993

for control of measurements and dilution of water samples

Reagents for Macherey Nagel water test systems

NANOCOLOR® Reagent Tube Tests

A list of all NANOCOLOUR Reagents Tube Tests
NANOCOLOR STANDARD TESTS
NANOCOLOR Labelling Explained

NANOCOLOR® Equipment

NANOCOLOR Compact Multiparameter photometers - PF-3
NANOCOLOR Compact Multiparameter Photometer - PF-12 Plus (with Turbidity Check)
NANOCOLOR Spectrophotometers - VIS II & UV/VIS II (with Turbidity Check)
NANOCOLOR Heating Blocks - VARIO 2, 4, HC, Mini

Software Downloads

Compact Multiparameter Photometer PF-12 Plus

For easy and fast measurements
Using NANOCOLOR® bar coded test tubes, the measurement is automatically performed after inserting the cuvette into the cuvette slot. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.

Approved

Reliable and comparable results

The reaction basis of NANOCOLOR® tests is based on international approved standard methods like DIN-, EN-, ISO-, EPA- and APHA.

Precise

Easy handling and highest accuracy

All NANOCOLOR® tests contain accurate predosed reagents, that are directly ready to use and calibrated accessories.

Versatile

The perfect test for every request

For all important parameters in water and wastewater analysis, a large number of tests with different ranges is available.

Unique

No mix up of tests Every

NANOCOLOR® test box is equipped with a colour coded label and can be identified clearly by its colour.

A full overview of all reagents and equipment can be found in the NANOCOLOR Analysis System Brochure.

Can I buy chemicals as a private individual?
The majority of chemicals can be purchased by private individuals but there are a number of products which are restricted for a number of reasons. These include Hazardous chemicals, weapon and drug precursor chemicals and other restricted chemicals.

What's the process for buying Chemicals?
Business User - You should have an account with Camlab so we can verify your status, for online purchases you need to be registered on the website against that business account and logged in. For hazardous and restricted chemicals you may need to undergo an additional check. To facilitate this you should provide a company number when making a purchase. New companies or sole traders may need to provide additional proof of a trading business to ensure we can fulfil your delivery.
These checks may add to the delivery times for these items, The delivery time period will not start until the chemical check has been completed; for clarification please phone 01954233110

Private user - For the purchase of Non-Hazardous chemicals you should be a registered user of the website and be logged in to make these purchases.

Guest checkouts for hazardous or restricted chemicals will be cancelled and refunded.

Delivery to Home addresses?
Camlab use a specialist chemicals courier to deliver chemicals, they will not deliver any hazardous chemicals to a residential address. These must be sent to a business address.

Home office license scheme
We are currently unable to supply chemicals to people who possess a home office license for private individuals under that scheme.

Home office scheme for details click here

Are Camlab chemicals suitable for clinical or other medicinal use?
Camlab supply chemicals for laboratory use only, they are not suitable or recommended for any other use.

Are Camlab chemicals suitable for food use?
Camlab supply chemicals for laboratory use only, they are not suitable or recommended for food use.